Screwdriver Bits

All have ball retaining groove on each face of the square drive. For insertion/removal of fasteners and fixings using 3/8" square drive tooling. Overall length: 50mm. Bit length: 20mm. Conforms to DIN standards.

Crosspoint

1/2" Square Drive Screwdriver Bits

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. For insertion and removal of fasteners and fixings using 1/2" square drive tooling. Manufactured from chrome vanadium steel and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. All have ball retaining groove on each face of the square drive. Conforms to DIN standards. Bit length: 20mm.
Overall length: 55mm.
except * 65mm or 70mm.

Hexagon

Q-MAX Cutters

The non-rotating metal hole cutter is manufactured from high tensile steel heat treated for a long keen cutting life providing burr free accuracy time after time.

To produce the hole a small pilot hole is drilled allowing a connecting bolt to join the punch on one side and the die on the other side of the materials. Pressure is then applied by tightening the bolt and thus the hole is literally punched out.

Capacity:
Mild steel up to 16swg (1.62mm).
Stainless steel up to 16swg (1.62mm).
Sheet copper, brass and aluminum up to 2.0mm.
Plus many other sheet materials and ductile plastic.

Other sizes available on request. Inch 3/8" to 1,3/4 ". Metric 10mm to 80mm. Plus squares and rectangles.

Metric

Precision Screwdrivers

Have nickel chrome molybdenum steel blades, hardened and tempered. Chrome plated, with swivel tops which resist oil and acid. Supplied in plastic cases. Ideal for jewellers' and watchmakers'.

Crosspoint

Pencil Brush

Wooden handle with steel ferrule.

Metal Bodied Oil Cans

Fitted spout with nylon pump unit.

26" Professional Toolbox

Industrial strength, structural foam construction withstands temperatures below zero. Lid access, quick storage access on both sides and removable tray for storage of tall objects. Rust resistant metal latches.

Oxford? Precision Engineers' Hand Tools

Manufactured from hardened steel that has been precisely ground to produce parallel edges so that the square has an exact right angle on both the inside and outside of the stock and blade, to ensure accuracy. Conforms to BS939 Grade B.

150mm (6") Engineer's Steel Square

Rutland™ Snow Shovels and Clearers

The telescopic handle Rutland™ contractor snow shovel is a strong, small lightweight shovel with a telescopic Aluminium shaft and a plastic D-grip handle, it doesn't take up a lot of space perfect for keeping in your car boot for emergencies!

Snow Shovel Telescopic Handle

Shovel pan Dimensions: 310x345mm.
Overall length: 700mm (closed) Handle extends to 840mm.

Crowfoot Wrenches

Chrome vanadium wrenches designed to be used for getting into tight spots and hard to reach areas, in particular around tubing such as hydraulic lines etc.

For use with 3/8" square drive tools.