Brick Jointer

Manufactured from high carbon steel. Used to produce concave joints in mortar that are more resistant to moisture, each end of the jointer is a different size. Concave joints help conceal small irregularities in the brick laying.

3/8" Square Drive Bi-Hexagon Sockets

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. Manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all accessories. Chamfered leading edge ensures easy fastener location.

Metric Deep

Bi-Hexagon sockets - 12 point - side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Requires only a one-twelfth turn to engage the next point of the socket

Senator® Roller Kit

3 Piece
Comprising of a bird cage paint roller, a medium pile refill and a plastic paint tray. Suitable for indoor use on smooth surfaces.

Yamoto? Cold Chisels and Punch Sets

This Yamoto? cold chisel and punch set contents everything you'll need to mark metal, realign holes, driving pins in/out of machine assemblies to cutting metal brickwork or stone.

Yamoto? tools are manufactured to meet and satisfy the needs of the industrial user.

CPS014 Cold Chisel and Punch Set (14 Pieces)

The CPS014 14 piece cold chisel and punch set from Yamoto? is manufactured from drop forged chrome vanadium steel and have ground cutting edges* the set contents the following types of chisels and punches:

Pin punches ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a hexagonal body for extra grip.

Centre punches manufactured from hardened and tempered steel with a hexagonal body for positive grip. Precision ground 60 point for accurate marking of work pieces.

Cold chisels are used by the Engineering and building trades to remove waste metal when a very smooth finish is not required, cutting and chipping brickwork or stone and when the work cannot be done easily with other tools, such as a hacksaw, file, bench shears or power tools. The angle of the cutting edge should be 60 to 70 degrees, inclusive, but it is dependant on the material to be cut. When cutting metal, the softer the material is, the more acute the cutting angle should be.

Taper punches used for aligning holes in jigs and fixtures etc. With a hexagonal body for extra grip.

*Where applicable.

Contents:
Pin punches: 3/16''x6'', 3/32''x4 1/4'', 1/8''x4 3/4'', 3/16''x5 1/4'' & 1/4''x5 3/4''.
Centre punches: 5/32''x5''.
Cold Chisels: 1/2''x6'', 5/8''x6 1/2'', 3/4''x7 1/2'' and 7/8'' x8''.
Taper punches: 3/16''x10'', 7/32''x10'', 5/16''x10'' and 3/8''x10''.

10mm AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Hexagon

Bi-hexagon Sockets

A heavy duty range designed to cope with the demands of industrial agricultural machinery and heavy plant, static or mobile. All Kennedy Professional sockets have a unique double knurl to give a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. Manufactured from chrome vanadium and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. Chamfered leading edge ensures easy fastener location. Used for tightening and untightening nuts where the threaded stem of the mating fastener prevents access with standard length sockets. Registered Design No. 2053516UK.

Metric

1/4" Square Drive Screwdriver Bits

Manufactured from high quality chrome vanadium, fully polished finish. Conform to DIN. Overall length: 37mm. Bit length: 19mm.

Torx

Double-Ended Ring Spanners

Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838, BS 192 : 1982 & BS 3555 : 1998.

Metric

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Spares for Kennedy Heavy Duty Roller Cabinets

To suit cabinets indicated.

Lock Links