Kennedy Cold Chisels

Kennedy cold chisels are manufactured from high quality, high strength octagonal section chrome vanadium steel with ground cutting edges. They are are used to channel brickwork, concrete, chip stone and to remove waste metal when a very smooth finish is not required or when the work cannot be done easily with other tools, such as a hacksaw, file, bench shears or power tools. The head of each chisel is chamfered to slow down the formation of the mushroom shape caused by hammering. Conform to: BS3066.

Half Round/ Bullnose Chisels

Used for cutting round bottomed grooves in steel such as oil grooves and also for 'roughing up' surfaces to be chipped by a flat chisel. The job is made easier by cutting grooves across the surface with this type of chisel then the raised portion can be easily chipped away with a flat blade.
Cutting angle 40 - 50 degrees to the vertical.

Kennedy Cases - Accessories

NB: complete case is shown for illustration only. Case, contents and tools are not included.

Yamoto Satin Finish Adjustable Wrenches

Yamoto? Adjustable Spanners have a slimline tapered parallel jaws for improved access into confined spaces with smooth adjustment and a self-locking jaw design to prevent unintentionally opening even when under full load.

Graduated laser etched jaws for fast repeatable jaw setting and adjustment. Manufactured from "I" beam section chrome vanadium steel for improved strength and rigidity, heat treated for extended tool life. Corrosion resistant satin finish. 22.5 offset head angle for positive torque control.

Suitable for marine engineering, automotive, aerospace, agricultural maintenance and assembly applications.

Conform to: ISO 6787-1982, ASME B.107.8M-1996, BS 6333-1995, DIN3117-1988, JIS B44604-1976.

Bumping Hammers

Highly polished striking heads and cheeks. One square and one round face. The most popular general purpose panel beating hammer. Hickory shaft. Manufactured to BS 4114.

Flat Faced

For straightening thicker gauge metals \twhere a reasonable striking force is needed.

Kennedy® Engineers' Steel Rules

Finest quality spring tempered rustless steel. Satin chrome. Anti-glare finish with permanent black figures and graduations. Extremely easy to read. EEC Class one accuracy: +/- 0.2mm full scale. Constant at 20°C.

Round End - Rigid Blade

Spring tempered rigid steel blades. 150mm/6" 19mm blade width. Other lengths 25mm blade width. With hanging hole.

Grosvenor Lead Free Solder

99.3% Tin and 0.7% copper. This alloy is a cost effective solution for lead-free soldering but does require a higher melting temperature, typically 227C. Solder wire uses the non-corrosive Ersin 362 flux giving excellent solder spread and fast wetting.

Kennedy Stillson Pipe Wrenches

Jaws are serrated in the opposite direction to ensure a secure grip. Used mainly in the plumbing industry for gripping pipes & nuts. Cast iron frame, drop forged handles and jaws. All moving parts are heat treated. Used mainly in the plumbing industry for gripping pipes and nuts. Conform with BS 3594 : Part 2. Available in 8 sizes ranging from 8" - 48".

Heavy-Duty

Kennedy Crowbars, Wrecking bars and Pry bars

Manufactured from carbon steel. These traditional designs are used by tradesmen in all industrial environments. Suitable for a wide range of general duty applications, ideal for dismantling timber constructions, opening packing cases and removing nails (depending on the type of bar). Also used in assembly applications offering safe leverage and alignment capability.

Chisel and V-Notch Wrecking Bars

Multifunctional tools used mainly for prising and levering, drawing large nails and demolition work, ideal for any general dismantling and stripping applications. The versatile Super lever type can be used as a light duty nail lifter, pry bar, adze or lever

Whitney Replacement Punches

To suit the Whitney Junior Metal Punch (WHI-560-0501A)

Line Level

Aluminium body which can be suspended from a guide line (e.g for bricklaying) or used flat on its base. Length: 80mm (3 1/4").