Kennedy Professional Combination Spanner Set

Kennedy Professional combination spanners are manufactured from chrome vanadium steel to exacting manufacturing standards they have a highly polished corrosion resistant mirror finish that also prevents oil and dirt from adhering to the spanner, for easier cleaning. These long reach, wall drive spanners Conform to: ANSI B107.9M.

Metric Combination Spanner Set (18 Pieces)

Contents:
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 and 24mm.

Nut Spinners

Manufactured from hardened and tempered chrome vanadium steel, with satin chrome finish. Oil and acid resistant high impact plastic handles 6?? (150mm), combined socket and blade length. Overall length: 230mm.

Inch (BA)

General-Purpose Shears

Traditional pattern stainless steel scissors with high polished finish. Asymmetrical handle design for improved user comfort and control.

Kennedy® Multi Angle Vice

Aluminium vice with a lockable multi-positionable ball joint, cast steel clamp and swivel mechanism. Horizontal/vertical grooved jaw is designed to hold irregular shaped objects. Removable jaw rubber covers for protecting delicate components. Will clamp to surfaces of 5 to 50mm thickness. Jaw width of 74mm. Upright: Rotates through 360° and the vice can swivel between 45° and 135°. Right angles: Vice can be rotated through 360°.

Cabinet & Chest Spares

To suit Kennedy, Senator and Yamoto cabinets and chests.

Locks

For cabinet and chest compatibility, please refer to our catalogue.

16mm Spigot End Fittings

Metric

Open End

T-Type Wrenches

Single Hex. Manufactured from chrome vanadium. For use in restricted areas.

Fluke Multimeters

These new clampmeters from Fluke, provide the highest level of safety and performance in a rugged ergonomic package. They are True RMS measuring to provide accurate measurements on today?s electronic systems.

Most models measure both AC & DC current and voltage, and have additional features to aid in troubleshooting everyday problems.

Designed to operate in harsh environments, some models have an integrated low pass filter and signal processing for stable readings in electrically noisy areas.

Models that feature Fluke's proprietary inrush measurement technology, filter out noise & capture motor starting current exactly as the circuit protection sees it.

375 True-rms AC Clamp Meter

The new Fluke 375 clamp meter offers improved performance perfect for many current measurement situations. With true-RMS AC voltage and current measurements, the Fluke 375 can read up to 600V and 600A in both AC and DC modes.

Fluke model number: 375
Application: Industrial
Cable size jaw (& cable size iFlex): 34 mm (100mm)
i-flex flexible current probe included: optional
True RMS: YES
AC Current (clamp) to: 1000A
AC Current (i-flex) to: 2500A
DC Current (clamp) to: 1000A
AC Voltage to: 600V
DC Voltage to: 600V
Resistance & Continuity: YES
Frequency to 400Hz: YES
Temperature measurement -10°C to + 400°C: n/a
Motor Start-up (inrush current) capture: YES
Detachable jaw clamp & torch: n/a
Low pass filter for noisy environments: YES
Removable display operates up to 10 metres: n/a
mV range compatible with other accs: YES
Min/Max logging: YES
Display backlight: YES
Display Hold: YES
Warranty (years): 3
Safety rating: CAT III 1000 V, Cat IV 600 V

Note : Cat IV is a higher safety rating

Burgess Engravers

Suitable for intricate engraving or security/identification marking. Each engraver is balanced to sit comfortably in the hand. The one hundred strokes per second penetrating pump action ensures the engraving point indents the workpiece rather than removing raw material from the workpiece, which could weaken it or change the molecular structure. The fine electro magnetic penetration adjustment allows use on a wide range of soft and hard materials including steel, plastic, glass and ceramics. Machined brass jaws prevent damage to engraving points if excess pressure is applied.

Engraving Points for Burgess Engravers

A2: for glass and steel. Solid carbide.
A4: for hardened steel. Carbide tipped.
A5: for soft metals and alloys.
A6/A7: ball points for metal embossing, hammering and leather work.
A8: abrasive point for frosting glass and smoothing.
A80: diamond point for fine glass engraving.

Jewellers' & Watchmakers' Tool Sets

A quality range of precision screwdrivers. Combination tool and driver sets have carbon steel blades (tweezers are stainless steel). Driver only sets have nickel chrome molybdenum alloy steel blades. All with attractive chromed handles.

11 Piece with Carbon Steel Blades

Contents: Parallel: 1.0, 1.2, 1.4, 1.8, 2.4 & 3.0mm. Crosspoint: PHO-2, PHO & PH1. Fine point awl & tweezers.