Screwdriver Sockets

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. For insertion and removal of fasteners and fixings using 3/8"square drive tooling. Unique knurled body gives extra grip which is essential for a quick tool change when your hands are greasy/oily. Manufactured from chrome vanadium steel and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. All have ball retaining groove on each face of the square drive. Overall length: 50mm. Bit length: 20mm. Conforms to DIN standards.

Torx

"Multipull" Blind Housing Puller

For the removal of blind housing bearings without the need to dismantle machinery or remove the running shaft. Positive seating allows even tension on the inner and outer bearing rings reducing resistance. The stabilisers reduce sideways movement and self centres the puller. The three sets cover a range of ISO bearings, if there is no ISO reference on the bearing refer to the puller spread and adaptor.



098000 - ISO designation: 6004-6010, 6004-6015. Reach: 125mm. Adaptor diameter: 5.5 - 8mm.098100\t - ISO designation: \t6299-6205, \t6200-6211 & 6212-6222. Reach: 415mm. Adaptor diameter: 5.5 - 12.5mm.098200\t - ISO designation: \t6300-6302 Reach: 490mm. Adaptor diameter: 16 - 31.75mm.

Disc Magnets

Nickle plated neodymium disc and block magnets Magnetic poles on both faces, supplied in tubes. Maximum working temperature 100°C

Disc

Senator® President Decorators' Tools

High carbon, clear lacquered steel blades. Wooden handles and half tang fixing. Suitable for general duty and household use.

Scraper (Half Tang)

Industrial Cartridge Grease Gun - Body Only

Long lasting pressure cast aluminium head and precision-fit piston. Close tolerances guarantee complete application of lubricants - no missed shots. Interchangeable filler point allows filling from any filler. Suitable for any application. Bulk fill.
Operating pressure: 400bar.
Maximum pressure: 600bar.
Overall length: 410mm.

Side Lever 37590

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Bulldog Square Punners

Used for compacting earth, hardcore and tarmac. Manufactured from cast, fine grain grey iron with a tubular steel handle.



Overall length: 1140mm.

Kennedy Hexagon Key L-Wrenches

Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish.

Spare Pipe Cutter Wheel

Spare cutting wheel to suit Kennedy Pipe Cutters: KEN-588-4800K & KEN-588-4820K (illustrated).

Spring Dividers

Manufactured from high quality polished steel. Ground finished points, a fine adjusting screw is mounted across the legs for setting the distance between the two points. A circular spring bow joins the legs, with a knurled extension attached for use when pivoting the dividers. Dividers are used for scribing arcs and circles, a light centre punch mark on the work keeps the pivot leg in the centre while marking.