1/2" Square Drive Screwdriver Bits

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. For insertion and removal of fasteners and fixings using 1/2" square drive tooling. Manufactured from chrome vanadium steel and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. All have ball retaining groove on each face of the square drive. Conforms to DIN standards. Bit length: 20mm.
Overall length: 55mm.
except * 65mm or 70mm.

Hexagon

Kennedy® Butane Soldering Tool

BS125
Piezo self ignition. Uses standard butane lighter fuel and is simple to refill. Fully adjustable tip temperature control with a safety fuel cut-off when cap is replaced. Textured anti-slip barrel with built in stand for anti roll. Supplied with pointed soldering tip. Can be used with single flat, double flat, hot air, hot air deflector and hot knife, can also be used as a blow torch. Supplied without fuel.

Power rating: 25W to 125W.
Soldering temperature: 580°C to 1300°C.
Run time: 60 minutes.
Overall length with cap: 235mm.
Overall length with soldering tip: 230mm.

Vanbox

Substantial construction from 1.2mm, 1.6mm, 2mm and 2.5mm sheet steel with powder coated finish and an advanced XLOCK - four point locking system. This system operates with one lock and one key and has worldwide patents pending. All boxes are supplied with two keys and are numbered for an optional replacement key service. Fitted with anti-jemmy bars all round, twin hydraulic arms, drop down handles and a full width split heavy duty piano hinge. Covered by a three year's manufacturer's warranty for defective parts.

Sentri XLOCK VB

Made from 1.2mm and 2mm steel with a black powder coated finish fitted with a protective tool mat.

Overall size (L x H x W): 930 x 472 x 450.
internal size (L x H x W): 894 x 450 x 446mm.

Weight: 35kg.

Delivery subject to availability.

Senator® Snap-off Blade Knife

8 segment, 18mm standard.



ABS body with sliding lock and blade snap off built into handle.
8 segment x 18mm blade.

Impact Extractor Sockets

Extracts rounded, seized or painted right hand threaded fasteners, the reverse spiral flutes are designed to bite into seized nuts and bolts providing greater grip for extraction. The socket bar is to drive out the fasteners from sockets, once removed.

3/8" Square Drive Impact Extractor Sockets

Table C Clamp

Five holes in base to allow fixture to work surface as a permanent clamp. Swivel foot to clamp tapered workpieces. Quick release lever.

Hoses

For use with Kennedy grease guns, flexible hoses improve access in confined spaces, 1/8" BSP connecting threads.

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Kennedy® Soldering Irons

Thermo-plastic handles, designed for comfort and a firm safe grip. The mains lead is held by a cable clamping screw which eliminates the strain on electrical connections. All supplied complete with a double flat nickel plated tip and 13 amp 3-pin plug with 1.5m power lead as standard. Manufactured to BS 3456. All 230V.

15 Watts Fine Duty.

For light duty electrical repairs and fine electronics work.

Chrome Molybdenum Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Metric

3/4? Drive Metric, Standard Length, 6-Point
Conform to: DIN 3129.