Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Cabinet & Chest Spares

To suit Kennedy, Senator and Yamoto cabinets and chests.

Castors

For cabinet and chest compatibility, please refer to our catalogue.

Pneumatic Brake & Clutch Bleeder

PBB100
Single man operated pneumatic bleeder which simplifies the bleeding of hydraulic fluid in vehicle clutches and brake systems, also used for the collection of other non-corrosive fluid spillage.
Has a 1ltr container with a 1/4 " NPT connection, operates from 90-145psi (6-10bar) air pressure with an air compsumption rate of 180ltr/min an extraction rate of 1.6ltr/min and vacuum (maximum) 550mm HG. Handles non-flammable liquids between 0 & 80C.

Kennedy Professional Socket Set

The most popular drive size used in the service and maintenance industries. This popularity is due to the strength and robust nature of 1/2" drive. All Kennedy Professional sockets have a knurl feature to give a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. Manufactured from chrome vanadium and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. Chamfered leading edge ensures easy fastener location. Sockets manufactured to: ANSI B107.5M : 1987, ANSI B107.1 : 1978 & BS 4006 : 1992. Accessories manufactured to: ANSI B107.10M : 1982 & BS 4006 : 1992.

M70MAW Metric, Imperial & Whitworth (70 Pieces)

Contents:

Sockets:
Metric 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 33 and 36mm.
AF 5/16", 3/8", 7/16", 1/2", 9/16", 19/32", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 11/16", 11/8", 13/16" and 11/4".
Whitworth 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" and 3/4".
Hex bit adaptors: 1/4" and 5/16".
Spark plug sockets: M10 and M14.
Convertors: 1/2" square female x 3/4" square male, 1/2" square female x 3/8" square male.

Accessories:
Quick release ratchet handle, sliding T-handle, swivel handle, universal joint, 75, 125, 250, and 450mm extension bars, 125 and 250mm wobble extensions. Robust fitted case with security padlock hole and cushion grip handle.

Kennedy 1000mm/40" Girder Section Spirit Level

Industrial quality with three factory set vials, horizontal and 2 plumb, aluminium body with powder coat finish. Accuracy: 0.75mm/m. Top face marked with metric and imperial graduations.

1/4" Square Drive Bi-Hexagon Sockets

Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All Bi-hexagon unless stated.

Metric Deep

Kennedy Hexagon Key L-Wrenches

Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish.

Metric

Hydraulic Grease Nipples

45 Type



For use with Kennedy grease guns and all other hydraulic grease equipment.

Kennedy Torque Wrenches

Kennedy 3/8?? square drive fixed head torque wrenches have a high quality chrome plated, polished steel head and retractable torque setting lever. A CLICK & SNAP? action indicates when the pre-set torque level has been reached.

Four easy read scales N.m, kgf.m, lbf.in x10, lbf.ft. Push through square drive connector to instantly reverse action. Knurled grip plastic handle.

Complete with factory tested calibration certificate, operating instructions and torque conversion chart. Supplied in blow moulded cases, except FTW800, which is in a cardboard case.

Manufactured to ISO 6789: 1992 (BS EN 26789: 1994).
Accuracy: plus/minus 4%.

3/8?? Square Drive Fixed Head Torque Wrenches

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.