Kennedy Double Diaphragm Fuel Transfer Pump

Heavy duty aluminium die-cast construction fuel transfer pump with a discharge rate of up to 1 gallon per 5 strokes (800ml per stroke). Ideal for use where compressed air/power is not available such as farms, construction sites, boates etc. Has a stainless steel piston and fuel resistant hi-nitrile rubber diaphragm. Includes a 2" die cast bung adapter and extra heavy duty steel handle with security locking latch. Pump inlet is fitted with an easy to clean wire mesh screen filter. Complete with a telescopic suction tube, adjustable to fit 50 to 205 litre (15 to 55 gallon) drums, with non-return valve. Easy dispensing through 2.4m (8') of anti-static neoprene rubber hose with die-cast dispensing nozzle. Weight 7.5kg.

Hose Pinch Clamp Set

HPS003
These professional tools are for clamping flexible hoses from 11mm to 60mm in diameter. Made from a composite of glass reinforced nylon, they are lightwieght, tough and have smooth rounded jaws to prevent damage to internal reinforcement.

Kennedy® Butane Soldering Iron Tips

Interchangeable tips for use with Kennedy® BS075 soldering iron.

Kennedy Phosphate Finish Adjustable Wrench Service Kits

Consisting of replacement jaw, knurl and pin.

Plastic Handled Scissors

Stainless steel blades. All supplied with protective PVC wallets.

Household Scissors

Suitable for general cutting applications around the house. Hardened and ground steel blades with asymmetrical plastic handles.

Tweezers

For workshop and home use. Cross pattern types are self closing and open only under applied pressure. High quality finish supplied singly or as a 6 piece set.

8 Piece Butane Soldering Iron Kit

Butane soldering iron with piezo self ignition. Fully adjustable temperature control with 'safety fuel cut-off' feature when cap is replaced. Comes complete with 5 tip attachments, cleaning sponge and safety stand.

Kit contents:
1x butane soldering iron.
5x tip attachments: 2.4mm and 4.8mm double flat, hot knife, hot air blower and hot air deflector.
1x cleaning sponge.
1x safety stand.

Kennedy Crowbars, Wrecking bars and Pry bars

Manufactured from carbon steel. These traditional designs are used by tradesmen in all industrial environments. Suitable for a wide range of general duty applications, ideal for dismantling timber constructions, opening packing cases and removing nails (depending on the type of bar). Also used in assembly applications offering safe leverage and alignment capability.

Chisel and V-Notch Wrecking Bars

Multifunctional tools used mainly for prising and levering, drawing large nails and demolition work, ideal for any general dismantling and stripping applications. The versatile Super lever type can be used as a light duty nail lifter, pry bar, adze or lever

Kennedy® Tapered Gauges

These are called taper gauges only because of their shape. They do not measure tapers they are ideally suited for the rapid accurate checking of the inside diameters of tubing, slot widths, hole sizes, setting calipers etc. Manufactured from spring tempered stainless steel. 0.1mm increments. Rustless. Constant at 20°C. Satin Chrome anti glare finish. Permanent black figures and graduations.

Body Repair Kit Spares

Spares for hydraulic hand pumps

Double Ended Male Snap Connector

For Collision Repair Kit