Kennedy Crowbars, Wrecking bars and Pry bars

Manufactured from carbon steel. These traditional designs are used by tradesmen in all industrial environments. Suitable for a wide range of general duty applications, ideal for dismantling timber constructions, opening packing cases and removing nails (depending on the type of bar). Also used in assembly applications offering safe leverage and alignment capability.

Chisel & Point Crowbar

For heavy duty levering and dismantling work, the angled heel blade offers greater leverage.

Kennedy Ratcheting Axle Stands

Suitable for supporting raised vehicles or equipment. Wide angled base, stamped and welded steel frame with solid steel control lever & protective red enamel coating. 10-position ratchet design that automatically locks when raised. Sold as pairs.

2 Tonnes Ratcheting Axle Stands (Pair)

2 Tonnes safe working load per stand (4 tonnes per pair).

Spring Dividers

Manufactured from high quality polished steel. Ground finished points, a fine adjusting screw is mounted across the legs for setting the distance between the two points. A circular spring bow joins the legs, with a knurled extension attached for use when pivoting the dividers. Dividers are used for scribing arcs and circles, a light centre punch mark on the work keeps the pivot leg in the centre while marking.

Kennedy Roadside Assistance

Kennedy Booster cables are manufactured from top quality double insulated multi strand copper cable for maximum power transfer.

Fitted with heavy-duty spring loaded clamps with heavy insulating sleeves for secure connection.

Suitable for cars, light commercial, HGV, PSV, marine and agricultural applications.

Available in three ratings:
Light duty rating 220Amp Order Code: KEN-503-5200K
Medium duty rating 350Amp Order Code: KEN-503-5250K
Heavy duty rating 480Amp Order Code: KEN-503-5280K

BBC16 Light Duty Booster Cables

BBC16 Light Duty Booster Cables Specification
Suitable for: 12 & 24V systems.
Cable length: 3.0m.
Cable diameter: 16mm2 multi-stranded core
Rated to: 220amps.

Kennedy Low Profile Trolley Jacks

Kennedy Low Profile Trolley Jacks have strong, robust steel chassis to provide stability when under load. A low entry height. Heavy duty fixed direction casters and swivel castors ensure easy positioning under the vehicle prior to lifting. The pump handle with comfort rubber grip is to rapidly raise and lower the load arm and the vehicle.

For use on a firm level surfaces.
DO NOT work under the raised vehicle until another means of support, such as axle stands are in place.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Kennedy 2.5 Tonne Low Profile Trolley Jack

Kennedy 2.5 Tonne Low Profile Trolley Jack has a strong, robust steel chassis to provide stability when under load. A low entry height of 85mm. Heavy duty fixed direction casters and swivel castors ensure easy positioning under the vehicle prior to lifting. The steel hydraulic block assembly includes dust seals to prevent oil contamination. The removable two piece pump handle with comfort rubber grip is to rapidly raise and lower the load arm and the vehicle.

Model number: T450L
Maximum load: 2.5 tonnes
Dimensions (L x W x H: 640 x 342 x 174mm)
Minimum height: 85mm
Maximum height: 450mm
Weight: 36kg

(Load ratings are Metric Tonnes i.e. 1 tonne 1,000kg).

For use on a firm level surfaces.
DO NOT work under the raised vehicle until another means of support, such as axle stands are in place.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Impact sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Impact TX Bit Driver Sockets

1/2" sq. dr.

Kennedy Specialist Automotive Tools

The Kennedy RRM046 radio release master set contains a comprehensive set of high quality tools suitable for authorised release and removal of in-car entertainment units. These professional tools, have a chromed finish and are manufactured from heavy-gauge materials to ensure these tools will not distort in general use.

Supplied in foam lined aluminium carry-case.

RRM046 Radio Release Master Set

Compatible with the following makes of in car entertainment units:
Audi, Becker, Becker from 2002, Blaupunkt, Blaupunkt from 2002,
BMW, Clarion - New, Clarion - Old, Fiat Brava, Bravo & Marea, Grundig, JVC, Kenwood II to 2001, Kenwood III from 2002, Mercedes Benz, Opel, Opel-Inbus, Panasonic, Panasonic from 2006, Pioneer, Porsche, Skoda from 2002, Sony I to 2001, Sony II from 2002, VW

Chrome Molybdenum Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

AF Deep

1/2? Drive Inch Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

4 PIECE GASKET SCRAPER SET

Rigid carbon scrapers ideal for cleaning cylinder heads, removing old sealants, carbon build up and a variety of general mutipurpose automotive applications.
Set includes blade lengths:
205 x 13mm (8" x 1/2"),
205 x 25mm (8" x 1"),
93 x 25mm (31/2" x 1"),
97 x 15mm (33/4" x 5/8").

Kennedy Crowbars, Wrecking bars and Pry bars

Manufactured from carbon steel. These traditional designs are used by tradesmen in all industrial environments. Suitable for a wide range of general duty applications, ideal for dismantling timber constructions, opening packing cases and removing nails (depending on the type of bar). Also used in assembly applications offering safe leverage and alignment capability.

Chisel & Point Crowbar

For heavy duty levering and dismantling work, the angled heel blade offers greater leverage.