High Grip Pound Thru' Screwdrivers

Through blade screwdriver with chrome vanadium steel blades and striking heads, suitable for striking with a hammer to free up seized screws. Fully hardened magnetic tips. Comfortable moulded grip. Hexagon blades.

Flared Tip, Round Blade

Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head.

Mechanical Puller Set

For harmonic balance removal, timing gears & other parts with bolt circle diameters from 38mm to 117mm (11/2" to 45/8"). Ductile steel yoke.

HPB9 Harmonic Balance

Contents: 1 x yoke. 1 x thrust bolt. 1 x ram nut. 3 x 75mm screws (3/8" x 24 UNF). 3 x 75mm screws (3/8" x 16 UNC). 1 x plastic storage tray.

Kennedy Hexagon Key L-Wrenches

Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish.

Metric

Open Jaw Slogging Wrenches

Manufactured to DIN 133.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Direct Drive Bits for Power Tools

1/4" Hex with ball recess.

Crosspoint

Open Jaw Slogging Wrenches

Manufactured to DIN 133.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Kennedy® Deep Pot Magnets

North polarity in centre separated from opposing pole by a continuous slot. Ideally suited for gripping applications. Supplied with M6 x 1 threaded bore fixing hole and keeper. Can be used in temperatures up to 550C.

Ring Slogging Wrenches

Manufactured to DIN 7444.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Kennedy Laminating Brushes

Laminating brush for fibreglass and resin projects. White bristle, stainless ferrule. Cream plastic handle.
Sizes: 1/2”, 3/4”, 1", 2", 3" and 4".

Screwdriver Bits

Manufactured from high quality chrome vanadium steel. To suit Yankee spiral ratchet screwdrivers.

Medium Duty