1/4" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Crosspoint

'Hi-Grip' Screwdrivers

Designed for maximum grip under load application. The red moulded cushion grip gives optimum operator comfort. Ideal for assembly work. Tough alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life.

Flared

Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head.

Direct Drive Bits for Power Tools

1/4" Hex with ball recess.

Flat

Offset Double Ended Screwdriver Set

Designed to give access into otherwise restricted areas. A versatile tool suitable for use in many applications.

3 Piece

Contents: No.1 Crosspoint x 3/16" Parallel, No.2 Crosspoint x 1/4" Parallel & No.3 Crosspoint x 5/16" Parallel.

Industrial Open Ended Spanners

Made from chrome vanadium steel with a satin finish body and highly polished heads, with a 15 offset. Conform to DIN 3110 & BS 192 : 1982.

Metric

Kennedy Spirit Levels

Kennedy box section spirit levels are a tough dependable level for on site use all day everyday with factory set vials, an all aluminium body with one milled working face.and a hard wearing powder coat finish with plastic
protective end caps.

Accuracy: 0.048° (0.75mm/m.)

900mm (36”) Box Section Spirit Level

Aluminium Body with, powder coat finish.
3x Vials:
1x Horizontal.
1x Plumb.
1x 45 Degree.
Milled Working Face.
Accuracy: 0.75mm/M.

Sheet Metal Clamp

The wide jaws distribute the clamping force evenly to prevent damaging the workpiece being handled. Quick release lever.

1/4" AF Hexagon Drive Screwdriver Bits

High alloy chrome molybdenum steel for use on hand and power tools.

Ball Point Hexagon

Kennedy Hexagon Key L-Wrenches

Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish.

Inch

Industrial Open Ended Spanner Sets

Made from chrome vanadium steel with a satin finish body and highly polished heads, with a 15 offset. Conform to DIN 3110 & BS 192 : 1982.

10 Piece - AF

Contents: 1/4" x 5/16", 5/16" x 3/8", 3/8" x 7/16", 7/16" x 1/2", 1/2" x 9/16", 9/16" x 5/8", 5/8" x 11/16", 11/16" x 3/4", 3/4" x 7/8" & 15/16" x 1".