Feeler Stock Coil

This handy product is housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. The stock is also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm. The case provides the ability to snip off the desired length without any waste.

1/2" x 20ft

Drain Test Bung

Used to pressure test or temporarily seal the end of an open pipe which is newly laid or decomissioned, preventing the ingress of water, gasses, rodents.

Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

1/2" x 12"

Feeler Gauges

Quality industrial with hardened and polished taper blades, enclosed in a steel case. Blades are clearly marked for easy identification.

Inch: Manufactured to BS 957: 2008 Part 1 Imperial.

10 Blade: .0015", .002", .003", .004", .006", .008", .010", .012", .015" & .025".

64 Piece Professional Decorating Kit

Contents:
5 x sheets grade 0 glass paper & grade 2 glass paper. 5 x dust masks. 2 x 25mm industrial paint brush. 2 x 13 1/2ltr plastic bucket 13, 50, 75 & 100mm industrial paint brushes. 50 & 75mm wide half tang scrapers. 38mm chisel point half tang putty knife. 200 half tang combination shavehook. Window scraper. Sanding blocks 96 x 69 x 25 fine & 96 x 69 x 25 medium. 310ml cartridge of decorators acrylic caulk. 310ml cartridge gun - plastic. 240mm economy paint tray - plastic. 230mm wide birdcage (jumbo) paint roller. 230mm long pile polyester roller refill. 230mm medium pile polyester roller refill. 230mm wide foam paint roller refill. Long pile radiator roller complete. Long pile radiator roller refill. Metal telescopic handle. general purpose masking tape 19mm x 50m & 50mm x 50m 200mm (8") paper hanging brush. 220mm plastic handle household scissors. 5m/16ft locking tape. 8 segment blade retractable knife. Pack of 10 replacement 8 segment blades. Jumbo sponge. 1m/39" rule. Wallpaper seam roller. 2 1/2ltr plastic paint kettle. Paste brush. 760mm canvas tool bag.

Sash Brushes

Plastic handle. Ideal for cleaning out sawdust, swarf etc.
Sizes: No.6, No.8, No.610, No.12 and No.16,

Kennedy Pressure Testing Pump Spares

A light, portable and compact 60 bar pressure testing pump. Tests pressurised plumbing and central heating systems with the system full of water. (Not suitable for gas pipe testing because water must be used.) Robust powder-coated steel construction, With easy-fill 10ltr reservoir, 1.5m 1/2" reinforced hose and a pressure gauge graduated in bar and psi.

Standard Spares;
Gauge 60bar: Order Code KEN-567-9000K
Hose 60bar: Order Code KEN-567-9020K
Seal Kit: Order Code KEN-567-9040K

Standard Plastic Bucket

Durable plastic rigid bucket with galvanised steel handle rotating plastic grip. Wide pouring lip and rounded reinforced edge. Easy to clean smooth interiors and exteriors.
Capacity: 13.5ltrs (3 gallons).

Pencil Brush

Wooden handle with steel ferrule.

Kennedy Drain Rods

Used for carrying up to 10x 36" rods.

Drain Rod Bag