T-Handle Clamps

Manufactured from high strength ribbed girder section heat treated carbon steel for improved strength and rigidity when placed under working loads, with nickel and chrome plated corrosion resistant finish the drive screw and T-bar are chemically blacked. Sliding T-handle for easy clamping. The swivel ball joint clamp foot ensures the clamping forces are applied evenly.

KENNEDY Adjustable Wrench

Drop forged chrome vanadium steel. Rubber comfort grip handle. Ideal for use in plumbing, installation and automotive applications. Ultra thin head designed for use in confined spaces. Graduated millimetre scale. More than 50% wider jaw compared to conventional adjustable wrenches (registered patent).
Conforms to: ISO 6787:2001, ASME B.107.8M:1996, DIN 3117:1988.

KENNEDY - WIDE JAW ADJUSTABLE WRENCH - 200mm/8"

Kennedy® Engineers' Steel Rules

Finest quality spring tempered rustless steel. Satin chrome. Anti-glare finish with permanent black figures and graduations. Extremely easy to read. EEC Class one accuracy: +/- 0.2mm full scale. Constant at 20°C.

Round End - Rigid Blade

Spring tempered rigid steel blades. 150mm/6" 19mm blade width. Other lengths 25mm blade width. With hanging hole.

Kennedy Cases - Accessories

NB: complete case is shown for illustration only. Case, contents and tools are not included.

Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Hex Driver Impact Sockets 3/8" sq. dr.

Hexagon sizes: 4, 5, 6, 7, 8, 10 & 12mm. Conforms to DIN 3129

Kennedy® Butane Soldering Iron Tips

Interchangeable tips for use with Kennedy® BS050 soldering iron.

Heavy Duty Liquid Measures

Chemical and oil resistant polyethylene liquid measures. Integral dispensing spout resistant to extreme weather conditions. Can be used in conjunction with dispensing spouts listed below.



Graduations: 1/2ltr - 1/4 & 1/2ltr, 1ltr - 1/4, 1/2, 3/4ltr, 2ltr - 1/2, 1, 1 1/2 & 2ltr, 3ltr - 1, 1 1/2, 2, 2 1/2 & 3ltr, 5ltr - 1, 2, 3, 4 & 5ltr

Kennedy Cold Chisels

Kennedy cold chisels are manufactured from high quality, high strength octagonal section chrome vanadium steel with ground cutting edges. They are are used to channel brickwork, concrete, chip stone and to remove waste metal when a very smooth finish is not required or when the work cannot be done easily with other tools, such as a hacksaw, file, bench shears or power tools. The head of each chisel is chamfered to slow down the formation of the mushroom shape caused by hammering. Conform to: BS3066.

Pitching/Masons Chisel

A stone dressing chisel for removing excess stone and facing work. Bevelled on one side.

Body Repair Kit Spares

Spares for hydraulic hand pumps

Flat Base

For Collision Repair Kit

Kennedy Low Profile Long Reach Trolley Jacks

Kennedy Low Profile Long Reach Trolley Jacks have strong, robust steel chassis to provide stability when under load. A low entry height. Heavy duty fixed direction casters, swivel castors and inside wheel ensure excellent manoeuvrability and easy positioning under the vehicle prior to lifting. The foot pedal is to rapidly raise and lower the load arm and the vehicle. The long reach pump handle has a comfort rubber grip. Includes a practical tray for carrying tools and a rubber pad for the saddle.

For use on a firm level surfaces.
DO NOT work under the raised vehicle until another means of support, such as axle stands are in place.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Kennedy 2 Tonne Low Profile Long Reach Trolley Jack

Kennedy 2 Tonne Low Profile Long Reach Trolley Jack has a strong, robust steel chassis to provide stability when under load. A low entry height of 76mm. Heavy duty fixed direction casters, swivel castors and inside wheel ensure excellent manoeuvrability and easy positioning under the vehicle prior to lifting. The foot pedal is to rapidly raise and lower the load arm and the vehicle. The long reach pump handle has a comfort rubber grip. Includes a practical tray for carrying tools and a rubber pad for the saddle.

Model number: T510L
Maximum load: 2 tonnes
Dimensions (L x W x H: 1006 x 365 x 136mm)
Minimum height: 76mm
Maximum height: 510mm
Weight: 42kg

(Load ratings are Metric Tonnes i.e. 1 tonne 1,000kg).

For use on a firm level surfaces.
DO NOT work under the raised vehicle until another means of support, such as axle stands are in place.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.