Senator® Curved Jaw Grip Wrenches

Senator® high strength grip wrenches bodies are manufactured from rolled chrome vanadium steel with serrated drop forged hardened steel jaws for a positive high strength grip every time! The body of the grip wrench is coated with a corrosion resistant bright nickel finish and the jaw opening and clamping pressure can be adjusted as required turning the knurled head screw adjuster. Each wrench is fitted with a wire spring to ensure efficient jaw opening. The locking mechanism holds the wrench in place once adjusted, leaving both hands free!

Senator® Heavy-Duty Wrenches

Heavy duty pattern. Drop forged, single piece body. Jaws are serrated in the opposite direction to ensure a secure grip. Used mainly in the plumbing industry for gripping pipes and nuts. Cast iron frame, drop forged handles and jaws. All moving parts are heat treated. Used mainly in the plumbing industry for gripping pipes and nuts. Sizes range from 8" - 36".

Senator® Engineers' Pliers - Slip Joint

Chrome vanadium with a chrome finish and textured grip dipped handles. With serrated parallel jaws for gripping flat workpieces and curved jaw for gripping nuts, pipes etc. Dual position joint allows use across a wide range of diameters.

Senator® Locking Tape Measures

Tough plastic case with a slide action blade lock. Locking spring assisted blade return. Rivetted metal end hook. Steel belt clip & wrist strap. Action lock holds the blade precisely where you want it. Blades and hooks are heavy gauge and corrosion resistant. Self-aligning hooks ensure accuracy for internal and external measurements. 5m and longer tape hooks have 4 rivets (3m/10' tape hooks have 2).

Chrome Cased

Senator® Engineers' Starter Tool Kit

Senator® Quality Tooling Tool kits are available for the home handyman, the builder, the workshop engineer and the decorator. All the kits contain the most essential tools required.

They are a great way to kit yourself out with the tools you require quickly and easily, at very competitive prices!

Engineers' Starter Tool Kit (47 Pieces)

6 piece 16cm cut 2 assorted needle file set.
10x 12 x 1/2" x 18T all hard hacksaw blades.
8" (200mm) C/V adjustable spanner.
6" (150mm) stainless steel rule with pocket clip.
Metric and Inch feeler gauge blade length: 60mm.
1lb ball pein hammer with hickory shaft.
16oz black rubber mallet with wooden shaft.
5M/16ft locking tape rule with chrome casing.
8 segment 18mm heavy duty snap-off blade knife.
Retractable trimming knife.
12" DIY hacksaw.
6" heavy duty snipe nose pliers with side cutter.
6" diagonal cutting nipper.
7" linesman pliers.
10" multiple slip joint plier.
10" straight jaw high strength grip wrench.
8 piece fluted handle screwdriver set.
7 piece 6-19mm drop forged open-ended spanner set.
8" straight blade tinsnip.
supplied in a 21" 5 tray cantilever toolbox.

Senator® Roller Cabinets and Tool Chests

The Senator® workshop tool storage range contains tool chests and roller cabinets that are ideal suitable for any workshop or garage. Manufactured from heavy gauge steel and finished with a corrosion resistant epoxy powder coating.

6 Drawer Tool Chest

The Senator® 6 drawer Tool chest is ideal for use with Senator® roller cabinets for storing tools.

Features
Ribbed back panel for extra rigidity.
Epoxy powder coated finish in blue/grey with chrome finished PVC drawer pulls.
The fully locking fold down lid
Supplied complete with foam liners.
Quick release smooth running 250mm ball bearing drawer slides. Supplied with a loose tote tray for carrying tools to work area. Strong chrome carrying handles.
Drawer loads should be evenly distributed.

Colour: Blue with grey drawer fronts.

Overall Dimensions (WxDxH): 668x315x389mm.
Top Compartment (WxDxH): 660x305x50mm.
Tote Tray (WxDxH): 430x170x45mm.
Drawer Sizes (WxDxH):
1 Drawer 590x279x101mm,
2 Drawers 590x279x49mm,
1 Drawer 281x279x49mm,
2 Drawers 127x279x49mm.
Weight: 22.2Kg

Senator® Soldering Irons

Senator® soldering irons are suitable for workshop and general electrical repair work. The Thermo-plastic handles are designed for comfort and a firm safe grip.

The mains cable is held by a cable clamping screw which eliminates the strain on the electrical connections. Supplied with a double flat nickel plated tip, 1.2m power lead and 3 amp three pin plug.

Manufactured to BS EN 60335-2-45.

E40 40W Soldering Iron

Senator® Roller Cabinets and Tool Chests

The Senator® workshop tool storage range contains tool chests and roller cabinets that are ideal suitable for any workshop or garage. Manufactured from heavy gauge steel and finished with a corrosion resistant epoxy powder coating.

3 Drawer Tool Chest

Features included all steel welded construction with full length piano hinge. The drawers are on 250mm (10") extendible sliders. Lockable lid with cantilever top tray.
Overall dimensions (WxDxH): 520x220x304mm.
Cantilever Tray (WxDxH): 500x115x50mm.
Top Compartment (WxDXH): 510x210x60mm.
Drawer sizes (WxDxH): 3@ 450x190x55mm.

Senator® Hand Stamps

Standard quality, with strength up to 800N/mm2. Hardness at the engraving: 58 - 60HRC. Type of characters according to DIN 1451.

Letter & Number Stamps

Senator® Heavy-Duty Diagonal Cutting Nippers

Chrome vanadium steel with a satin finish. Also have a serrated section behind the head for gripping. Hard wearing heavy duty PVC safety handles. Also with serrated gripping and crimping jaws behind the head.