Stanley Locking Tape Measures

3-rivet, Tru zero end hook moves to compensate for accurate inside and outside measurements. Mylar coated blade is up to 10 times more resistant to abrasion than normal lacquered blades. Compact case with belt clip for ease of storage. Strong 19mm width blade for large standout.

Available in 3m/10' and 5m/16" models.

Line of Chords & Circumference

Manufactured from hardened steel, polished and ground finish, precision etched for accurate measurement. The rules can be used to measure diameters up to 600mm (24") and the equivalent circumference can be read directly from the rule, totally eliminating the need for calculating the circumference. The line of chords scale on the rule, when used in conjunction with dividers allows angles to be set or measured.

Stanley FAT MAX Screwdrivers

Stanley Fat Max screwdrivers with soft grip handles and smooth domed ends to allow added comfort and a fast spinning action. Handles are moulded directly to the chrome vanadium shaft by a virtually unbreakable bond making them highly reliable and providing extra long life. colour coded ends allow for easy identification of the `right` screwdriver for each screw type.

Folding Steel Rules

Manufactured from rustless steel. Metric graduations conform to BS4372: 1968.

Pattern 57

Metric - subdivided to mm, figured cm one side. Inch - subdivided to 1/16", figured 1" other side.

Engineers Rules

All rustless rules up to and including 600mm/24" have an anti-glare, easy to read finish with permanent black figures and graduations. Rustless rules over 600mm/24" are standard rustless steel. Metric graduations conform to BS 4372 : 1968.

Pattern 64R

Round end - rigid blade. 2 sides - 4 edges. Metric - subdivided to mm, 1/2mm, figured every 10mm. Inch - subdivided to inches, 16ths, 32nds, 64ths, 10ths, 20ths, 50ths, 100ths. 1-35-403 Blade thickness 2.0mm. 0-35-406 Blade thickness 1.0mm

Stanley FAT MAX Screwdrivers

Stanley Fat Max screwdrivers with soft grip handles and smooth domed ends to allow added comfort and a fast spinning action. Handles are moulded directly to the chrome vanadium shaft by a virtually unbreakable bond making them highly reliable and providing extra long life. colour coded ends allow for easy identification of the `right` screwdriver for each screw type.

Multibit Ratcheting Screwdriver & 10 Bits.

Patented 3-position ratcheting mechanism. Spring loaded ball bearing indexed bit storage system for quick and easy access. Tri-Lobular, textured handle for maximum comfort and torque.

Stanley Woodworking Tools

Stanley Mitre saw block the easy to use solution for precise mitre cuts.
Patented storage system for storing saw.
90 and 45 mitre slots as well as 22.5 for octagonal shapes.
Manufactured from lightweight high impact ABS plastic.

Length: 300mm.

Mitre Saw Block

STHT0-05927

Heavy-duty ribbed aluminum body stays flat and rigid. The efficient clamp design holds paper or screen firmly in place. Bi-material handle provides comfort and protection. Accepts most sandpaper and sanding screens



80 x 23 mm

Stanley Block Planes

Suitable for end grain work or any application where single handed operation is required. The plane bodies are manufactured from fine grey iron ground and polished to a high quality finish. The unmachined areas are coated in a durable high gloss epoxy coating. The cutter is set at a low angle this ensures vibration is kept to a minimum producing good results when used on plastic laminates and other man made materials. All have adjustable cutter alignment and depth of cut.

4 1/2" Block Plane

Small professional plane made from close grained fine grey iron. Fully adjustable for depth of cut, cutter alignment and mouth opening. For end grain and general purpose fine finishing work. Comes with pouch for convenient storage. 40mm blade width.