Action Can Maintenance Sprays & Lubricants

AC-90 Displaces water, starts wet engines, penetrates rust, protects from corrosion, lubricates and stops squeaks. Silicone free, electrically non-conductive and can be used on or near electrical components, motor circuits etc, without affecting insulation or causing short circuits.

Available in aerosols that use no CFC?s and are ozone friendly with new CO2 Propellant, or in screw top metal cans and drums.

Does Not Contain Kerosene, Paraffin, Silicone or Naphtha. Contains up to 20% more product than comparable butane propellant products.

AC-90 Liquid Maintenance

Rotary Shaft Seals

Rotary Shaft Seals are used in a wide range of applications and are excellent for sealing high speed rotating shafts. We offer a complete range of metric and inch sizes with various sealing lip styles and materials. Used in conjunction with the shaft repair kits can improve the overall sealing efficiency of the application.

Single Lip Plus Wiper Lip Type

Gasseal Non-Setting Sealant

An off-white sealant with good sealing properties for use on threaded and face joints.

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings

Fast Drying Anti-Rust Matt Finish

Very rapid drying anti-rust matt finish primer. High zinc content. Shower-proof in 15 mins and touch dry in three hours. Meets three national performance standards AST MB117 hold salt spray, BS AU 148C PT14 1969 natural weathering, and DIN EN ISO 12944-1 corrosion protection of steel structures. Size: 500ml aerosol.

MZ-90

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings

Rotary Shaft Seals

Rotary Shaft Seals are used in a wide range of applications and are excellent for sealing high speed rotating shafts. We offer a complete range of metric and inch sizes with various sealing lip styles and materials. Used in conjunction with the shaft repair kits can improve the overall sealing efficiency of the application.

Single Lip Plus Wiper Lip Type

603* - General Purpose Retainer

Can replace or reinforce interference fits, pins, splines, keys and screws, giving slip fitted parts with a 0.1mm diametrical clearance greater push out resistance. * Replaces 601.

Solent? Tough Stuff' Absorbents

Following on from the success of the Solent Plus absorbents are these all-new "ToughStuff" pads and rolls. Featuring a
unique three-layer construction, these products offer the very best of absorbent technology that is available today. Sandwiching a high loft filling of 100% polypropylene absorbent fibres there is a spun bond coverstock to the top for better wear resistance and a fine fibre coverstock to the underside for a lowlint finish that doesn't impede the speed of absorbency. Pads and rolls both utilise the same construction and are available in maintenance, oil-only or chemical grades with the same colour coding as all the other absorbents in the Solent Plus spill control range.

Oil Only Roll

Pack quantity: 1.
Size: 50cm x 40m.
Absorbs: 110 litres.