Shaft Repair Sleeves

Quickly and economically repair grooved and worn shafts for rotary oil seals. Fitting new seals on already worn shafts can result in repeat replacement of the seals. Grooving wear on a shaft can require expensive re-machining or even result in the shaft having to be replaced. Repair sleeves are simply pushed over the worn running surface. No special equipment is required - a standard depth installation tool is supplied with the sleeve. A mallet and a pair of pliers are all that are required for the repair job. The surface is machined without directionality, wear resistant often a better finish than that of the original shaft.

Solent? Absorbent Rolls

Many applications for absorbents can be met by making use of one or more of these rolls. Make a selection from medium weight 50cm or 90cm wide, or lightweight 50cm x 80m long. All sizes and weights are perforated for economy of use.



Oil-only/Medium Duty
Size: 50cm x 40m
Absorbs (ltrs): 80

Packing Extractors

With Hardened and tempered steel screws, designed to give maximum penetration into gland material and flexible shafts for removal of packing of any size, even in difficult positions. Type "TRACC" have and integral tip corkscrew tip, type "TRACR" have replaceable tips for extended life.

Type TRACC - Integral Tip

uni POSCA Marker

The POSCA water based marker produces opaque, vibrant colours that write on Metal, Paper, Plastic, Glass and Fabric. Widely recognised within the artistic community as being perfect for creating unique designs and extensively utilised and recommended within the Automotive industry. Water based pigment ink allows creation of an endless palette. Thanks to the vivid opaque pigment ink, POSCA guarantees a professional finish every time. Valve system ensures ink will not dry out when cap is left out. POSCA is rain resistant but can be washed off when necessary. Recommended in the automotive industry due to ink not containing lead or cadmium. No smell, contains no alcohol no solvent and will not bleed through paper. Environmentally friendly product

Fine Bullet Tip - PC3M

perma FUTURA Lubricators - 100cc

Suitable for single-point lubrication of roller and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals and chains. This lubrication system is ideal for areas that must be kept hygienically clean. Due to its resistance to corrosion it is especially suited for applications in the food industry.

Perma® FUTURA Lubricators must be used with activators which can be supplied to suit differing discharge periods according to individual applications.
1 month discharge period: PTC-729-3600R (Yellow)
3 month discharge period: PTC-729-3600F (Green)
6 month discharge period: PTC-729-3600M (Red)
12 month discharge period: PTC-729-3600H (Grey)
Please Order Separately

Industrial Melting Pots

A range of melting pots which have been designed for industrial melting of waxes, glues and plastics etc., for coating, casting, protecting etc. The pots are electrically heated and thermostatically temperature controlled from 50C to 200C. Constructed from anodised aluminium with ceramic fibre insulation. Pots supplied with 2M cable and fused plug, lifting handle, double-wall heat-conserving lid, on/off switch and safety thermal cut-out. 220/240V as standard.

Solent? Industrial Floor Paint

Solent? Industrial floor paints transform drab, stained or scuffed concrete and similar surfaces. Suitable for floors in warehouses, workshops, shop floors garages,
basements, etc.

Synthetic Resin Based Industrial Floor Paint 5Ltr

Solent? Maintenance floor paint is supplied in 5 Litre tins that will cover up to 8m2 per litre of concrete floor. For the very best results Solent recommend 2 coats are applied to produce an attractive and hardwearing finish. Solent floor paint is easy to use, No primer is required and once dry, it is easy to clean, oil, grease and water resistant. Making it ideal for warehouses, garages and workshops etc.

*Please note, colours are for guidance only.

Q8 Oils Haydn Hydraulic Oils

Industrial quality anti wear hydraulic oils. Recommended for all machine tool hydraulic systems, robotics and control systems where superior anti wear, filterability, accuracy and consistency is required.

VG32

Markel Paint Markers

Markel Paint Markers are custom designed for a wide range of cold to hot applications. Available in 5 types.

Type B: All purpose cold surface marker which has the widest spread of applications. Timber, brick, metal surfaces and rubber. Temp marking range 45C to 65C. Available in blue, black, brown, green, orange, pink, purple, red, white and yellow.

Type H: Yellow hot surface marker for applications like colour coding foundry rises and runners and non-ferrous metals whilst hot, coils, billets, bars, ingots etc. Temp marking range 65C to 650C.

Type K: White - marks extremely hot rough surfaces, castings, forgings, ingots, billets without burning or running off. Temp marking range 760C to 1200C.

Type P: White - for marking steel prior to galvanising process. Marks are completely removed in the pickling bath and will not interfere with galvanising process. Temp marking range 45C to 65C.

Type HT: Red - hot metal surfaces eg steel blooms, bars, coils of strip etc. The mark is highly visible on metals, castings, coils etc. it must be stored outside. Temp marking range 120C to 870C.

Anti Rust Protection Spray - For Tools and Packing

Solent Green Moisture Guard is a soft thin film moisture/ corrosion protective coating. Packed in a large 500ml aerosol. The coating has a slight green colouring which clearly indicates treated areas. Ideal for longer terms moisture/corrosion protection of machined components/moulding dies and tools. Removed easily with Solent Industrial Cleaner, part number SC1-500B.