Food Safe Clear Gear Oils

H1 registered, these gear oils are made from synthetic base oils combined with selected additives to produce a high performance gear lubricant. With excellent corrosion protection, oxidation and thermal stability they extend gear life/operating duty and lower maintenance costs

Food Safe Clear Gear Oil Grade G460

330 - Multi-Bond Structural Adhesives

For use where the gaps between parts are bigger (up to 0.4mm). Resists flex peel and shock loads. Suitable for ceramic, wood, steels, certain plastics and smooth concrete.

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings

Rustoleum Combi Colour

Long lasting metal protection. Anti-rust primer and topcoat in one. Can be applied direct to rust or bare metal. High coverage: 10.5m2 per litre. Hides blemishes in one coat. Flexible film formula.

Isopon P40 Glass Fibre Compound (Two Part)

Chemical paste for bridging holes and rust in steel, glass fibre etc. Forms a very hard durable surface that can be sanded and shaped as required, can be covered by P38 polyester filler or painted over directly.

PlastiKote Woodstove Twist & Spray

New Easy-Spray Technology - provides added control to make spray painting easier, faster and cleaner than ever before.
New, ultra smooth formula, providing flawless coverage that dries quickly to a tough, durable finish. Twist and lock mechanism means there is no separate top to remove or replace after use. Cap and button design shields the finger from paint for a cleaner spray-painting process. Attractive low sheen finish. Provides protection against the elements. Preserves the life of metal. Durable and abrasion resistant.
A beautiful satin sheen that is exceptionally durable, and provides resistance against fading. Touch dry in 2-3hrs, thoroughly dry after curing. To cure: After painting, allow to dry 1 hour then cure by ring up the equipment for a full hour at high heat. Curing must be done within 8 hours of application.
Coverage: 2.23m².

Industry Painter Marker

Highly permanent colour paste. Excellent opacity, weather and temperature-resistant. Lightfast and water-resistant. Writes on most surfaces even when rusty, dirty or wet.
Line width: 10mm.

950

Impact Adhesive

Ideal for producing a strong bond on contact, without the need for jigs, clamps or weights.

Techniclean MTC 43 Machine Tool Cleaner

Techniclean MTC 43 is a medium to heavy duty machine tool cleaner and steriliser, based upon powerful low foaming surfactants, emulsifiers and antimicrobiological agents.
APPLICATION
Techniclean MTC 43 has been specifically formulated to deal with a wide variety of machine tool contaminants and is easy to use with minimum disruption to production, being added direct to the coolant system whilst still in operation.
FEATURES
Compatible with common soluble coolants and metal substrates
Keeps machine tools in a clean and efficient condition
Cleans machine tool systems of a wide range of contaminants including fatty build-up in pipelines and floor ducts
Kills bacteria and fungis
Emulsifies floating tramp oil
Low foaming properties
No further corrosion protective required
Used whilst machines are operating normally
CONDITIONS OF USE
An addition of 1 - 3% of Techniclean MTC 43 is recommended. The amount added depends on the general condition of the coolant system (1% is usually adequate)
Introduce Techniclean MTC 43 where there is a good coolant movement e.g. immediately beyond the pump outflow back to the main settling tank, or direct into a velocity trench or floor
return channel. This ensures complete mixing with the coolant.
Add Techniclean MTC 43 8 - 24 hours the day before the coolant is scheduled to be discarded. The machine tools should then be operated normally for a minimum of eight hours.
Machine tools, which are not wetted by the emulsion, could be cleaned manually by using a 2 - 3% dilution of Techniclean MTC 43.
Following this period of circulation (max 24 hours), empty the entire coolant system and machines and dispose of the coolant in accordance with normal work procedures.
Rinsing with a fresh coolant (about 1%) is recommended.

Images not available for 5kg or 219kg

Paint Markers

Permanent and waterproof on all non-absorbent surfaces, gives sharp glossy finish with medium bullet tip.