Isopon P40 Glass Fibre Compound (Two Part)

Chemical paste for bridging holes and rust in steel, glass fibre etc. Forms a very hard durable surface that can be sanded and shaped as required, can be covered by P38 polyester filler or painted over directly.

3-in-1 Oil

"A tool kit in a can". Multi-purpose suitable for lubricating, penetrating, cleaning and prevents rust. For use in the home, office, workshop and countless other areas. The flexible plastic spout allows you to reach those hard-to-get-at spots.

Compact Gasket Cutter

Precision made hand tool for efficient on-site cutting
of circular gaskets from compressed
fibre jointings, rubber and cork-elastomer sheet.

Features:
Readily adjustable for diameters from 20mm (13/16") to 600mm (24").
Long extension bar available for diameters up to 900mm (35").
Dual metric/inch calibration.
Cuts compressed fibre jointings up to 5mm thickness; cork-elastomer to 12mm.

Boxed kit containing main body, extension bar, ten blades, and operating instructions.
Cutting board, long extension bar, and straight edges are
available as optional extras.

Enamel Paint

High gloss rust covering enamel paint. Corrosion resistant, can be applied directly to rusty metal and repels moisture providing long term protection. Touch dry in 20 mins (subject to humidity/temperature), no need for primer or undercoat. Coverage 0.6m2 per 500ml can.

Hammer Finish

Kennedy Line Marker Paint

Kennedy Line Marker paint is a durable, weather resistant and highly visible paint that is suitable for marking out and defining key areas in factories, warehouses, playgrounds, sports fields, tennis courts, leisure centres and road surfaces. Kennedy Line Marker is a CFC and lead additive free formulation that is touch dry in 15-20 minutes and fully cured in 24hours.

Suitable for use with stencils, line or for free hand marking. Fully compatible with major brand applicators.

750ml Aerosol available in a range of colours.

For the Kennedy Line marking dispenser gun see order code: KEN-715-6200K

Line Marker Paint

No.1 Metal Primer

Fast drying providing a good finish prior to painting.

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings

High Performance Adhesive

Size: 250ml

2402

perma CLASSIC Lubricators - 120cc

A single-point lubrication system for roller and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals, chains, etc. operated at ambient temperatures that reach from 0C. up to +40C.
Typical applications can be found in mining, steel, automotive and mechanical engineering.

Perma® CLASSIC Lubricators must be used with activators which can be supplied to suit differing discharge periods according to individual applications.
1 month discharge period: PTC-729-3600R (Yellow)
3 month discharge period: PTC-729-3600F (Green)
6 month discharge period: PTC-729-3600M (Red)
12 month discharge period: PTC-729-3600H (Grey)
Please Order Separately

Chain Lubricant

Thermally stable synthetic chain lubricant with exceptional adhesion, penetration & load bearing capacity.
Temperature limits: -45°C to 250°C. Odourless non-toxic silicon-free. Is not washed by water. Can be used in a wide range of hostile environments.

Viscogen KL 23