Q8 Oils Haydn Hydraulic Oils

Industrial quality anti wear hydraulic oils. Recommended for all machine tool hydraulic systems, robotics and control systems where superior anti wear, filterability, accuracy and consistency is required.

VG32

Janitol Ultra Sanitiser

A dirty working environment causes potential hazards that can be avoided. There is a legal responsibility on the employer to meet the Management of Health at Work Regulations 1999. When choosing the right product, follow this simple 3-Step product selector:SOILING - Identify type and degree of soiling to be removed. SURFACE - Ensure the type of surface to be cleaned. ENVIRONMENT - Understand the implications on the environment in which the cleaning is required.



Dual action cleaner and sanitiser. Kills bacteria and removes general food soilings such as fats, oils and grease. Contains no perfume to taint food. Conforms to BS 6471 QAP 200 - maximum dilution 1:200 with water.

Ambersil Mould Protective 2 Spray

A durable non greasy film that displaces and repels moisture and will not harden or crack, protects stored moulds against corrosion. Easily "moulded off" when restarting production or it can be removed using Amberklene FE10 or ME20 solvent cleaners.

AMS4 Silicone Grease Spray

Multi-purpose silicone grease. XG250 silicone grease in easy to apply form.

Vulcan Packing Extractors

Vulcan gland packing extractors are ideal for the removal of old, worn and hardened packing.

The extractors have hardened and tempered steel screws, designed to give maximum penetration into gland material and flexible shafts for removal of packing of any size, even in difficult positions.

Available in two types:
Type TRACC have an integral fixed corkscrew tip.
Type TRACR have replaceable tips for extended life.

Type TRACC Integral Tip Packing Extractors

This set of four packing extractors is suitable for use with the following packing sizes:
5-6.5mm (3/16??-1/4??)
8-10mm (5/16??-3/8??)
11-16mm (7/16??-5/8??)
20mm + (3/4?? +)

Protective Coating Red-Hot-Dip

Hot dip strippable plastic coating moulds itself around the component or tool being coated to provide 100% coverage and protects against corrosion and impacts, for up to ten years. The component protected can be easily identified through the translucent coating. Simply removed by peeling it off, leaves behind a thin oil film to provide short term protection against corrosion. The removed protective dip can be reused. Never directly apply heat to melt the protective dip, always use with a suitable melting pot. Working temperature 130C to 160C (for optimum results 140C to 145C).

AD160 - Amber colour

Ultrawave Q Series Ultrasonic Benchtop Cleaning Baths

The Q-Series from Ultrawave combines new technology with ease of operation and a modern design to reinvent ultrasonic cleaning. Medical, laboratory and other industry professionals can now command excellent, repeatable and traceable cleaning results from the Q-Series of ultrasonic bench-top cleaners. Available in 7 capacities: 2.5, 3.75, 4.5, 9.5, 12.5, 17,5 and 25 litre models.

Reduced dead spots and minimal standing waves increase ultrasonic activity.
More homogenous cavitational activity throughout the tank means a more consistent cleaning action.
Improved instrument and component cleaning cycle after cycle.
Faster, more effective cleaning results.
All this means consistently cleaner instruments in a quicker cycle time.

Q-Series models are supplied with the following features as standard:
Basket and lid/drip tray.
Digital control panel.
Heated 0 - 80C.
Frequency leap technology.
Timer (0 - 99 mins).
Drain outlet.
SD card slot for digital validation.

Sherlock® Silicone Sealants - General-Purpose

Sherlock high performance Acetoxy silicone sealants provide a permanently water tight flexible seal and offers excellent adhesive properties, making it suitable for use on glass, sanitary ware, ceramics and non-porous surfaces.

Typical applications: Sealing around door and window frames, sealing glass to glass and aluminium, sealing around pipes, sanitary fixtures and duct work. Draft proofing casement windows and doors.

Not suitable for use with aquaria. On porous or unsound surfaces priming is advised. Not suitable for use on bitumen or oily surfaces. Over painting is not recommended. It is the users responsibility to determine suitability.

Supplied in 310ml cartridges for use with a caulking gun.

Available in a range of colours.

High Performance Cutting Fluid

Improved machining of special grade stainless steels and aluminium alloys. Contains aluminium corrosion inhibitors. For drilling, turning, milling, threading, grinding. Bactericide free - reduced dermatitis issues. No odour. Highly resistant to micro-organisms, bacteria, fungi - pH-value 9.4. Novel lubricating component - Extremely efficient lubrication and cooling resulting in longer tool life.

Multan 77-4

Rust-Oleum Hard Hat Top Coats

Provides strong surface protection in extreme conditions. Fast drying and high gloss. Comes in a 500ml spray can. Please note, colours are for guidance only.