Techniclean MTC 43 Machine Tool Cleaner

Techniclean MTC 43 is a medium to heavy duty machine tool cleaner and steriliser, based upon powerful low foaming surfactants, emulsifiers and antimicrobiological agents.
APPLICATION
Techniclean MTC 43 has been specifically formulated to deal with a wide variety of machine tool contaminants and is easy to use with minimum disruption to production, being added direct to the coolant system whilst still in operation.
FEATURES
Compatible with common soluble coolants and metal substrates
Keeps machine tools in a clean and efficient condition
Cleans machine tool systems of a wide range of contaminants including fatty build-up in pipelines and floor ducts
Kills bacteria and fungis
Emulsifies floating tramp oil
Low foaming properties
No further corrosion protective required
Used whilst machines are operating normally
CONDITIONS OF USE
An addition of 1 - 3% of Techniclean MTC 43 is recommended. The amount added depends on the general condition of the coolant system (1% is usually adequate)
Introduce Techniclean MTC 43 where there is a good coolant movement e.g. immediately beyond the pump outflow back to the main settling tank, or direct into a velocity trench or floor
return channel. This ensures complete mixing with the coolant.
Add Techniclean MTC 43 8 - 24 hours the day before the coolant is scheduled to be discarded. The machine tools should then be operated normally for a minimum of eight hours.
Machine tools, which are not wetted by the emulsion, could be cleaned manually by using a 2 - 3% dilution of Techniclean MTC 43.
Following this period of circulation (max 24 hours), empty the entire coolant system and machines and dispose of the coolant in accordance with normal work procedures.
Rinsing with a fresh coolant (about 1%) is recommended.

Images not available for 5kg or 219kg

Rotary Shaft Seals

Rotary Shaft Seals are used in a wide range of applications and are excellent for sealing high speed rotating shafts. We offer a complete range of metric and imperial sizes with various sealing lip styles and materials. Used in conjuction with the shaft repair kits can improve the overall sealing efficiency of the application.

Single Lip Type

Remover

Industrial methylated spirit based blend for easy removal and minimum residual effect.

Loctite 3463 Metal-filled 2-Part Epoxy

"2K Epoxy" - Sets in 10 minutes. Steel filled kneadable Stick. Adheres to damp surfaces and cures under water. Chemical and corrosion resistant. Can be drilled, filed and painted. Ideal for emergency sealing of leaks in pipes and tanks, smoothing over rough finish welds and repairing small cracks in castings

Working life: 3 min.
Fixture time: 10 min.
Shear strength (GBMS): >6 N/mm²
Compressive strength: 82,7 N/mm²
Service temperature range: -30 °C to +120 °C

Solent? Absorbent Pads

Solent Plus absorbent pads are available in two thicknesses, medium or light and are suitable for use anywhere that fluids have leaked or spilt. Simple colour coding makes selection easy. For most indoor applications use grey/black. These will absorb most fluids, including oils, fuels, solvents, coolants, water and foodstuffs such as milk or wine. If there's a possibility of aggressive fluids such as acids or alkalis being spilt, use the yellow ones. Where an oil or fuel spill is likely outdoors, it's best to put the white ones in place. These repel water while absorbing the oils and fuels.



Oil-only/Light Duty
Size: 50 x 40cm
Pack Qty: 50
Absorbs (ltrs): 0.65

Rusto-leum Metallic Top coats

To enhance the appearance of machines, toolboxes, pumps, valves etc. Provides strong surface protection. 500ml aerosol. Please note, colours are for guidance only.

Enamel Paint

This tough enamel has long lasting flexibility when used to cover rust, bare metal and wood, repelling moisture to give long term protection. It must be applied in temperatures of 5 C or above and is sag resistant to eliminate brush strokes, dilutable by white spirit and can be used for interior or exterior applications.

Castrol High Temperature Grease

High performance lithium complex grease. NLGI 2 grade. Operating temperature range -40 to +150°C. High load carrying capacity. Good water resistance & adhesion to metal surfaces.

Layout Ink Spray

Specialised paint designed for the marking out of metal surfaces in toolrooms, machine shops etc. White is designed for use on dark or cast surfaces. Blue is designed for use on bright or machined surfaces. 400ml aerosol.

Layout Ink Spray

Specialised paint designed for the marking out of metal surfaces in toolrooms, machine shops etc. White is designed for use on dark or cast surfaces. Blue is designed for use on bright or machined surfaces. 400ml aerosol.