Araldite 2013 - Metal Coloured Epoxy Paste

Metallic appearance, Thixotropic with good gap filling properties. Non sagging up to 5 mm thickness. Suitable also for a variety of substrates, including ceramics, glass, rubbers and rigid plastics. Ideal for vertical applications. Ideal for Ferrous metals, aluminium, copper, zinc and galvanised metal etc. Light handling strength at 4 hours.

567 Master Pipe Sealant

Low strength thread sealant with high lubricity to prevent galling on stainless steel fittings. (Should be used with activator 7649).

Recommended for all coarse metal threads where slow cure is required to prolong time frame for adjusting valves and fittings.
Temperature Range: -55C to 205C
AGA Approval No. 3207 to 1050kPa (152psi).

Clear Acrylic Laquer

Fast drying, tarnish resistant with a high gloss smooth finish. Suitable for use over any automotive paintwork. Supplied as 500ml aerosol.

Spilkleen Granules - MGSG18

A low dust mix of calcium carbonate and china clay granules. Mixed granule sizes ensure rapid spill absorption. For use with oils, paints, inks, dyes, etc. Neutralises weak acid spills. More absorbent than clay granules.



Oil absorbency 51%, water absorbency 64%. A low dust mix of calcium carbonate and china clay granules. Mixed granule sizes ensure rapid spill absorption. For use with oils, paints, inks, dyes, etc. Neutralises weak acid spills. More absorbent than clay granules.

Hammerite Hammered Finish Paint

Forms a tough barrier which repels moisture and provides long lasting protection. Corrosion resistant with a high gloss colour retention. Can be applied directly onto rusty metal - no need for a primer or undercoat, (just use a wire brush to remove loose paint etc. ensuring to leave a dry dirt free surface). Supplied in 250ml, 500ml, 1ltr, 2.5ltr and 5ltr tins or 400ml aerosol. Typical: Brush 4.5sq metres per 400ml can.

Hammered Finish - Tins

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings

Action Can Maintenance Sprays & Lubricants

AC-90 Displaces water, starts wet engines, penetrates rust, protects from corrosion, lubricates and stops squeaks. Silicone free, electrically non-conductive and can be used on or near electrical components, motor circuits etc, without affecting insulation or causing short circuits.

Available in aerosols that use no CFC?s and are ozone friendly with new CO2 Propellant, or in screw top metal cans and drums.

Does Not Contain Kerosene, Paraffin, Silicone or Naphtha. Contains up to 20% more product than comparable butane propellant products.

Industrial Spillage Granules

A fire retardant, dust-free compound that is highly absorbent, non-toxic and lightweight. Can be incinerated. Conforms to BS476 Part 7 class 2. 30ltrs.

Solent Food Safe Silicone Grease

A versatile silicone grease for operation in extremes of high and low temperature. Food Safe Silicone Grease can also be used on food product applications or where water repellent properties are of prime importance as it offers excellent physical performance and is NSF H1 registered.
Size: 500g.

Castrol Metal Cutting Lubricants

Chlorine, nitrite and phenol free synthetic grinding fluid. Specially formulated for the grinding of tungsten carbide. Excellent wetting properties. Resistance to all types of corrosion. High resistance to bacterial and fungal growth. Low foam in water conditions.

Syntilo CR27