2-drum Workfloor

Workfloors are a viable alternative to spill pallets where a lower working height is required for easier access. A bunded storage and dispensing area can easily be created by making use of a selection of the three different sizes. All polyethylene construction.
L x W x H (cm): 126 x 86 x 15
Sump (ltrs): 150

SW-2

So-Grease 'Plus' EP2

High load lead-free lithium grease. Contains extreme pressure additives to allow use in heavy load conditions. Contains anti-rust additives to protect against corrosion. Anti-oxidants included to prolong product life High ageing stability/high oxidation stability.
Available in grade EP2.
Supplied in 400g, 5kg, 12.5kg or 50kg containers.

Araldite 2011 - Multi Purpose Epoxy - Long working Life

Room temperature curing, high strength and toughness. Versatile and excellent resistance to dynamic loading. Ideal for large areas of bonding and/or a long working time. Ideal for Ferrous metals, aluminium, copper, zinc and galvanised metal, Polyamides, Polystyrene Foams, PU foams, ceramics, wood etc. Light handling strength at 7 hours.

Hammerite Paint

Forms a tough barrier which repels moisture and provides long lasting protection. Corrosion resistant with a high gloss colour retention. Can be applied directly onto rusty metal - no need for a primer or undercoat, (just use a wire brush to remove loose paint etc. ensuring to leave a dry dirt free surface). Supplied in 250ml, 500ml, 1ltr, 2.5ltr and 5ltr tins or 400ml aerosol. Typical: Brush 4.5sq metres per 400ml can.

Smooth Finish - Aerosol

Castrol Magna Slideway Lubricant

Based upon highly refined mineral oils which incorporate tackiness and lubricity additives. Provides smooth slideway movement under heavy loads. Excellent anti-wear properties.

Magna 2/22/32/68/GC32

No images are available for GC32 Magna Oils

Shaft Repair Sleeves

Quickly and economically repair grooved and worn shafts for rotary oil seals. Fitting new seals on already worn shafts can result in repeat replacement of the seals. Grooving wear on a shaft can require expensive re-machining or even result in the shaft having to be replaced. Repair sleeves are simply pushed over the worn running surface. No special equipment is required - a standard depth installation tool is supplied with the sleeve. A mallet and a pair of pliers are all that are required for the repair job. The surface is machined without directionality, wear resistant often a better finish than that of the original shaft.

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings

7240 Activator

Increases cure speed on passive and inactive surfaces. For large bond gaps. For low (<5°C) temperature curing.

Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

20ltr Vinyl Holdall Spill Kit

Contents:
15 x pads.
2 x socks.
3 x disposal bags.

243* Nutlock Threadlocker

Medium strength. Works on all metals including chrome free platings, Improved temperature resistance (180C) and heat aging, improved oil tolerance, Prevents loosening on parts such as pumps, motor mounting bolts, gearboxes or presses.