510 - Flange Sealant

Recommended for high temperature applications (up to 200C), where maximum solvent resistance is required.
AGA approved No. 2590 up to 6900kPA (100psi).

7031 Quick Clean

Neutralises acidic surfaces on the work surface and removes alkaline deposits left by soda or ammonia based solutions which weaken the bond of the adhesive.

290 - Penetrating Threadlocker

High strength, post application with very low viscosity. Vibration proof. WRC approved.

Loctite 401 - General-Purpose Instant Adhesive

For bonding ceramics, aluminium, steel, leather, fabric and paper in seconds. Maximum operating temperature: 120°C. NSF P1 registered. Available in 3g, 20g and 50g.

326 - Rapid Cure Structural Adhesives

For joining flat faces of rigid, close fitting metal and glass. Moisture and solvent resistant.

Loctite 406 - Prism Cyanoacrylate Adhesive

For rubber, plastics, EPDM, nitrile and neoprene. Replaces 495, 414 and 424. Use with Polyolefin Primer 770 for difficult to bond plastics and rubber such as polypropylene, silicone etc. Available in 20g, 50g and 500g. Maximum operating temperature: 120°C.

All-purpose Cleaner

All-purpose cleaner and degreaser. Leaves no film or residue. Ideal for preparing surfaces for lubrication, bonding or sealing. 400ml.

7070

SuperLube Grease

Multi-purpose synthetic lubricant with PTFE. Silicone free. H1 approved. Temperature range
-43C to +230C



SuperLube Grease: Suitable for heavy duty and multi-purpose applications. Out-lasts conventional greases.

Loctite SuperFlex Silicone Sealants

Provides a solid rubber seal directly from a tube. Will not sag or slump during applications. Can be used to produce gasket seals up to 6mm thick. For use with all common engineering materials.

330 - Multi-Bond Structural Adhesives

For use where the gaps between parts are bigger (up to 0.4mm). Resists flex peel and shock loads. Suitable for ceramic, wood, steels, certain plastics and smooth concrete.