6300 High Strength Retaining Compound

LOCTITE® 6300™ is designed for the bonding of cylindrical fitting parts. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. Typical applications include holding gears and sprockets onto gearbox shafts and rotors on electric motor shafts.



Technical Data:
• Diametrical clearance: Up to 0.15mm
• Service temperature range: -55°C to + 175°C
• Tensile shear strength: 20 N/mm²
• Fixture time on steel: 10 min.
• Pack size: 50ml

Benefits:
• Leading in Health & Safety
• No hazard symbols, no risk phrases & no safety phrases
• oeWhite” Material Safety Data Sheet ?? no entries in sections
2, 3, 15 and 16 of MSDS acc. to (EC) No. 1907/2006 ?? ISO
11014-1 Good thermal resistance

8040 - Freeze & Release

Releases seized and corroded parts by shock freezing (-43C). Released parts remain lubricated and protected from corrosion.

510 - Flange Sealant

Recommended for high temperature applications (up to 200C), where maximum solvent resistance is required.
AGA approved No. 2590 up to 6900kPA (100psi).

638* - High Strength Retainer

For heavy duty applications on cylinder liners, splines, structural tubing, drive keys etc. High viscosity. Available in 3ml, 50ml and 250ml. *Replaces 635.

7031 Quick Clean

Neutralises acidic surfaces on the work surface and removes alkaline deposits left by soda or ammonia based solutions which weaken the bond of the adhesive.

660 Quickmetal

Ideal for keeping machinery running by repairing worn coaxial parts without the need for total dismantling and re-machining. Allows the re-use of worn bearing seats, key ways, splines, tapes or retaining shims. (Use with Activator 7240 or 7649)

Loctite 598, High performance silicone sealant

Loctite 598, High performance silicone sealant for use as flexible gaskets Excellent oil resistance high flexibility temperature range: 200C continuous operation short-term exposure up to 260C.

511* - Thread Sealant

Seals and locks in any position. Low strength and easily dismantled. Contains teflon to prevent galling. *Fast cure version of 572. Conforms with:BS 6956 : 7 (gas). Crries the German DVGW approval. tested in accordance with EN751-1. Certified to NSF P1.

Loctite 406 - Prism Cyanoacrylate Adhesive

For rubber, plastics, EPDM, nitrile and neoprene. Replaces 495, 414 and 424. Use with Polyolefin Primer 770 for difficult to bond plastics and rubber such as polypropylene, silicone etc. Available in 20g, 50g and 500g. Maximum operating temperature: 120°C.

Hybrid Glue

Extra strong, versatile solution that combines the characteristics of an epoxy with a multi-purpose glue. Shock, temperature and water resistant, repositionable (5 minutes) and flexible, transparent and solvent free.



• Shock resistant
• Flexible
• Water resistant
• Temperature resistant
• Repositionable (5 minutes)
• Transparent
• Solvent free