290 - Penetrating Threadlocker

High strength, post application with very low viscosity. Vibration proof. WRC approved.

326 - Rapid Cure Structural Adhesives

For joining flat faces of rigid, close fitting metal and glass. Moisture and solvent resistant.

290 - Penetrating Threadlocker

High strength, post application with very low viscosity. Vibration proof. WRC approved.

648 - Engineering Adhesive

Suitable for use at continuous working temperature of up to 175C. Can fill gaps of up to 0.15mm. High shear strength, medium viscosity and solvent resistant.

High Performance Silicone Gasket - 5900

Typical applications include stamped sheet metal covers (timing covers and oil sumps) where good oil resistance and the ability to withstand high joint-movement is required. It withstands on line, low pressure tests carried out before product begins to cure. The thixotropic nature of LOCTITE 5900 reduces the migration of liquid product after application to the substrate. LOCTITE 5900 has an excellent adhesion profile to an outstanding wide variety of plastic substrates, as well as glass, ceramics and metals. NSF International Registered to NSF Category P1 for use as a sealant where there is no possibility of food contact in and around food processing areas.

Loctite Instant Adhesives

The Loctite O?ring kit saves the need for complete disassembly. Eliminates the need for an inventory of different sized O-rings. Joints resist water/oil and are as strong as the rubber itself. Kit contains: 7 standard diameter sizes of nitrile cord, splicing jig, safety knife and Loctite 406 instant adhesive (1 bottle).

O?Ring Kit

Loctite 245 Medium Strength Threadlocking Compound

Loctite 245 Medium Strength High Viscosity Threadlocking Compound. Availavle in 50ml and 250ml.

Loctite Hysol 3473 A&B - Metal Set S3 - Fast Cure

Loctite Hysol 3473 A&B is a steel filled, 2K-Epoxy adhesive, for emergency repairing and rebuilding worn metal parts. Ideal for repairing pipes and castings as well as cracks in housings and machine parts.

Typical Properties
? Mix ratio by volume: 1:1
? Mix ratio by wight: 100:100
? Working life: 6 min.
? Fixture time: 15 min.
? Colour: Grey
? Viscosity: Putty
? Shear strength (GBMS): 20 N/mm
? Compressive strength: 60 N/mm
? Operating temperature: up to 120C

2701* Studlock Threadlocker

To replace interference studs etc. Also removes the need for blind holes for studs in oil filled castings. Requires light torque for removal. *Replaces 270.

330 - Multi-Bond Structural Adhesives

For use where the gaps between parts are bigger (up to 0.4mm). Resists flex peel and shock loads. Suitable for ceramic, wood, steels, certain plastics and smooth concrete.