Food Safe Clear Gear Oils

H1 registered, these gear oils are made from synthetic base oils combined with selected additives to produce a high performance gear lubricant. With excellent corrosion protection, oxidation and thermal stability they extend gear life/operating duty and lower maintenance costs

Food Safe Clear Gear Oil Grade G460

So-Hydra 'Plus' Hydraulic Oil

Excellent demulsifying properties (water and water containing fluids are rapidly separated). Very good corrosion protection to steel. Good corrosion protection to copper. High ageing stability/high oxidation stability. Good anti-wear protection. Very good hydrolytic stability. Excellent filtration behaviour. Low foaming. Excellent air release.
Available in grades VG32 to VG150.
Supplied in 20 litre stacking poly containers or 205 litre barrels.

Drain Covers

When a spill occurs outside, the most likely outlet for fluids to run away to are the drains. It is a legislative requirement that sufficient protection is in place for all at-risk drains. This is best met with one or more drain covers, of which three types are available. The clay drain covers are only for use in an emergency, as once moulded to the drain they cannot be re-used. Where ongoing use is anticipated, such as each time a bulk delivery is made, a polyurethane cover should be used. The neoprene cover (not illustrated) is for occasional use only.

SPSP4 4-DRUM ALL WEATHER POLY SPILL PALLET

A spill pallet full of rain water does not offer much protection should a drum leak. Where pallets are not kept under a shelter, make use of this unique design complete with dual lockable shutter doors allowing access from both sides. The unit also includes integral ground anchoring points.

So-Cool "Plus" GP

Environmentally improved - does NOT contain phenols, boron, triazene, PTBBA or chlorinated additives. Based on highly refined mineral oils. High degree of machine tool lubrication. Ideal for a wide range of machining operations. Low odour. Low unit cost. Specially formulated for use in both hard and soft waters.

Recommended concentrations:
General machining 7% or (a dilution of 14 to 1). Grinding (surface, cylindrical centreless) 2 - 3% or (a dilution of 2% 50 to 1 or 3% 33 to 1).
Available in grade SC-GP.
Supplied in 20 litre stacking poly containers and 205 litre barrels.

Solent? Lubricants Engine Oil

Solent lubricant? Supergrade FS2? is a high performance, semi synthetic, multi-temperature engine oil for all engines including multi valve, fuel injected and turbo charged, it will provide greater protection against engine wear than non-synthetic oil even at motorway speeds.

FS2005 Supergrade FS2? Engine Oil - Semi Synthetic 10W/40

Solent lubricant? Supergrade FS2? refined mineral oil with special multifunctional synthetic additives:
For all petrol, diesel and LPG cars, vans and lorries.
For multi valve, fuel injected and turbo charged performance vehicles.
Can be mixed with other oils.
Assists easy engine starting in cold weather.
Assists in reducing fuel consumption.
Gives far greater protection against engine wear than non-synthetic oil.
Excellent lubricity in all conditions.
Excellent sludge control in "stop-start" urban motoring conditions.
Affords high protection at motorway speeds Increased oil change intervals - change your oil less often.
Meets the performance level requirements for: API/SL/CH-4; Mercedes Benz 227.5; 229.1; 228.0/1; VW 501:01; 505.00, MAN 270/271.

Food Safe Hydraulic Oils

Designed for use in areas where incidental contact may occur, these oils are based on high quality synthetic grade oils, compounded with state of the art anti-corrosion and EP substances. Non-toxic, they comply with FDA regulations and are InS H1 registered.

Food Safe Hydraulic Oil Grade G32

So-Slide "Plus" GP

Excellent lubricating properties under high pressure working conditions. Anti-wear additives to maximise machine tool life. Lubricates and flows freely even at very low temperatures. Eliminates slip stick and judder. Eliminates pick up and scoring.
Available in grade VG68.
Supplied in 20 litre stacking poly container or 205 litre barrels.

So-Protect Plus Wax

Excellent hollow corrosion protection for use in the automotive industry. Provides protection for machinery in the agricultural and construction industries. Ideal for corrosion protection on unfinished parts, press tools and moulds. Easily applied by spraying, rolling or brushing. Thixotropic product, doesn"t run off. Thermally stable film Leaves a thick film that can be easily removed using solvents. Compatible with so-clean cleaning products. 36 months protection indoors and 24 months protection out of doors.
Available in grade SP-CPW.
Supplied in 20 litre stacking poly container.

So-Hydra 'Plus' Hydraulic Oil

Excellent demulsifying properties (water and water containing fluids are rapidly separated). Very good corrosion protection to steel. Good corrosion protection to copper. High ageing stability/high oxidation stability. Good anti-wear protection. Very good hydrolytic stability. Excellent filtration behaviour. Low foaming. Excellent air release.
Available in grades VG32 to VG150.
Supplied in 20 litre stacking poly containers or 205 litre barrels.