So-Gear "Plus" EP

Excellent corrosion protection. Low foaming, excellent air release. Excellent demulsifying properties(water and water containing fluids are rapidly separated). High ageing stability/high oxidation stability. Extremely high load-carrying capacity, extreme pressure, anti-wear performance. Excellent bearing wear protection (under mixed friction conditions) ? FE8. Excellent protection from scuffing, excellent wear protection - FZG. Excellent micropitting resistance in the load stage and endurance test.
Available in grade VG320.
Supplied in 20 litre stacking poly containers and 205 litre barrels.

Image not available for VG220 205ltr

Food Safe Hydraulic Oils

Designed for use in areas where incidental contact may occur, these oils are based on high quality synthetic grade oils, compounded with state of the art anti-corrosion and EP substances. Non-toxic, they comply with FDA regulations and are InS H1 registered.

Food Safe Hydraulic Oil Grade G32

Drain Covers

When a spill occurs outside, the most likely outlet for fluids to run away to are the drains. It is a legislative requirement that sufficient protection is in place for all at-risk drains. This is best met with one or more drain covers, of which three types are available. The clay drain covers are only for use in an emergency, as once moulded to the drain they cannot be re-used. Where ongoing use is anticipated, such as each time a bulk delivery is made, a polyurethane cover should be used. The neoprene cover (not illustrated) is for occasional use only.

Food Safe Anti-Seize Paste

Formulated for use on assemblies in difficult areas where fretting corrosion and corrosion induced by wet environments occur. It can also be use to lubricate slow moving slides and pivot pins. Resistant to hot, cold and salt water it can be used across a wide temperature range where the solid lubricate including PTFE gives excellent dry lubrication and forms a barrier between all surfaces. Non-toxic, it complies with FDA regulations and is H1 registered.

SOLENT Aqueous-Orange Citrus Based Aqueous Cleaner

Solent Aqueous Orange:
Citrus-Based Aqueous Cleaner
Aqueous Orange is highly concentrated, low alkaline blend of citrus solvents and powerful surfactants, designed to remove oils and greases, inks, polishing compounds and lapping slurry from hard surfaces. It can be diluted with water for maximum economy and its micro-emulsion formula offers the benefits of water-based efficiency with solvent based performance. It also contains a corrosion inhibitor and can be used both manually and in machine operations.
Replaces white spirit, paraffin and highly alkaline cleaners.

So-Cool Plus Cast Iron

Semi-synthetic formulation. Excellent anti-foam characteristics. Environmentally improved - does NOT contain sodium nitrite, phenols or chlorinated additives. Excellent sump life and corrosion protection. Superb tramp oil rejection characteristics. Enhanced tool tip life. Low drag-out loss - highly cost effective in use. Based on highly refined mineral oil. Increased detergency.
Recommended concentrations:
General machining 5% or (a dilution of 20 to 1). Arduous operations/difficult materials 7% or (a dilution of 14 to 1). Grinding 3% or (a dilution of 33 to 1).

So-Cool "Plus" GP

Environmentally improved - does NOT contain phenols, boron, triazene, PTBBA or chlorinated additives. Based on highly refined mineral oils. High degree of machine tool lubrication. Ideal for a wide range of machining operations. Low odour. Low unit cost. Specially formulated for use in both hard and soft waters.

Recommended concentrations:
General machining 7% or (a dilution of 14 to 1). Grinding (surface, cylindrical centreless) 2 - 3% or (a dilution of 2% 50 to 1 or 3% 33 to 1).
Available in grade SC-GP.
Supplied in 20 litre stacking poly containers and 205 litre barrels.

Just-Orange Citrus Based Solvent Degreaser

Citrus-Based Solvent Degreaser
Just Orange is a powerful, citrus-based solvent degreaser for the cleaning and degreasing of engineering components and equipment. Effectively removes heavy oils, greases, bitumen, wet paints, adhesives and sealants from virtually all hard surfaces.

Contains no Chlorinated or Aromatic solvents.
For use as an alternative to solvents such as acetone, benzene, butyl cellusolve, CFC’s, Freon, Methylene Chloride, HCFC’s, isopropyl alcohol;, methyl ethyl, ketone, mineral spirits, toluene, trichloroethylene, xylene etc.

So-Hydra 'Plus' Hydraulic Oil

Excellent demulsifying properties (water and water containing fluids are rapidly separated). Very good corrosion protection to steel. Good corrosion protection to copper. High ageing stability/high oxidation stability. Good anti-wear protection. Very good hydrolytic stability. Excellent filtration behaviour. Low foaming. Excellent air release.
Available in grades VG32 to VG150.
Supplied in 20 litre stacking poly containers or 205 litre barrels.

All Weather Poly Spill Pallet

A spill pallet full of rain water does not offer much protection should a drum leak. Where pallets are not kept under a shelter, make use of this unique design complete with dual lockable shutter doors allowing access from both sides. The unit also includes integral ground anchoring points.

SPSP-2