Solent Flaw Detector Inspection System

Fast reliable method for visually inspecting and spot-checking surfaces of welds, exotic alloys or standard metals, highly stressed structural members, critical castings, shafts, gears, spindles, and any other hard part where identification of surface flaws is essential. Detects flaws such as cracks, pin holes, welding laps and porousness either during manufacture or on site. A three part system. SFD-501C is a cleaner. SFD-502C is a dye penetrant. SFD-503C is a developing fluid that reacts with the dye in SFD-502C to show small cracks in the weld. Each part supplied in an ozone friendly 500ml aerosol.

Flaw Detector Dye Penetrant

Highly sensitive red dye, for use when detecting flaws on metal components under normal lighting conditions.

Solent? Dry Moly EP Lubricant

The molybdenum disulphide lubricant particles are one micron or less in size allowing the product to adhere in the smallest surface irregularities. Fast drying at room temperature, the dry coating can be polished if required, to a high shine providing micro coating of lubricant for slides, bearings, chutes and conveyors. The dry film is resistant to pick up and resists the accumulation of debris. Ideal for fastener lubrication where it will prevent galling, particularly on stainless steel. Effective on foundry equipment where high temperatures up to 450C are common. Also suitable for open gear lubrication and any location where a wet coating is not acceptable or would burn off. Provides lubrication at extremely high load rates up to 100,000 psi. Suitable for all steels, copper, and brass components. No silicone content. Packed in a 500ml aerosol for economy in use.

Leak Detector Spray

A specially formulated, high performance, white fluid, designed specifically to identify even the smallest gaseous leak. Applies a thin uniform film of surface active agents which accurately identify any leak or bleeding of joints, bubbles in the applied film indicate the location of the leak. Aerosol enables fast and easy application. Convenient and accurate in difficult to reach areas. No wastage or spillage. Propelled by compressed air - will not give a false reading if mechanical sensing equipment is used. Long shelf life, unlike other CO2 propelled leak detector sprays, the pressure will not not drop off due to CO2 degradation during storage. Suitable for use with most common industrial gases including compressed air, acetylene, butane, propane, chlorine, hydrogen, and natural gas. Not recommended for use on medical equipment where there could be a risk of ingress into the patient airway. Supplied in a 400ml aerosol.

Open Gear Spray with Molybdenum

Solent Tufgear Lubricant is a premium extreme pressure lubricant packed in a 500 ml aerosol. Based on Molybdenum Disulphide anti-wear additives. Suitable for lubricating all open gears where a thin film is specified. Suitable for temperatures as low as -40C to 100C.

Enamel Paint

High gloss rust covering enamel paint. Corrosion resistant, can be applied directly to rusty metal and repels moisture providing long term protection. Touch dry in 20 mins (subject to humidity/temperature), no need for primer or undercoat. Coverage 0.6m2 per 500ml can.

Hammer Finish

Solent? Industrial Floor Paint

Solent? Industrial floor paints transform drab, stained or scuffed concrete and similar surfaces. Suitable for floors in warehouses, workshops, shop floors garages,
basements, etc.

Synthetic Resin Based Industrial Floor Paint 5Ltr

Solent? Maintenance floor paint is supplied in 5 Litre tins that will cover up to 8m2 per litre of concrete floor. For the very best results Solent recommend 2 coats are applied to produce an attractive and hardwearing finish. Solent floor paint is easy to use, No primer is required and once dry, it is easy to clean, oil, grease and water resistant. Making it ideal for warehouses, garages and workshops etc.

*Please note, colours are for guidance only.

Solent? Layout and Marking

The Solent? range of industrial bullet point markers with liquid paint produce a clear and strong opaque result on any steel, aluminium, rubber, timber, plastic, ceramics and other materials .

Available in a range colours.

Liquid Paint Marker

Bullet tipped. 2.3mm point size.

Solent? Layout and Marking

The Solent? range of industrial bullet point markers with liquid paint produce a clear and strong opaque result on any steel, aluminium, rubber, timber, plastic, ceramics and other materials .

Available in a range colours.

Liquid Paint Marker

Bullet tipped. 2.3mm point size.

Solent? Layout and Marking

The Solent? range of industrial bullet point markers with liquid paint produce a clear and strong opaque result on any steel, aluminium, rubber, timber, plastic, ceramics and other materials .

Available in a range colours.

Liquid Paint Marker

Bullet tipped. 2.3mm point size.

Solent? Layout and Marking

The Solent? range of industrial bullet point markers with liquid paint produce a clear and strong opaque result on any steel, aluminium, rubber, timber, plastic, ceramics and other materials .

Available in a range colours.

Liquid Paint Marker

Bullet tipped. 2.3mm point size.