Solent Maintenance Aerosols

Within the Solent Maintenance range of aerosols you'll find electrical contact rapid cleaners, foam cleaners, multi purpose oils, penetrating sprays, rust protection, flaw detectors, weld anti splatter, mould release, drive belt dressing sprays and many more.

All are formulated to stringent standards of quality, to meet the demands of the commercial user!

Maintenance Spray

Solent Maintenance SM4-500C maintenance spray is ideally suitable for:

LUBRICATING - as it is a high performance mineral oil based lubricant with PTFE.
DISPLACES WATER - To help Start damp petrol engines.
PENETRATES - To allow easy release of rusty fixings.
CLEANS & PROTECTS - Cleans metal surfaces and prevents rusting of treated parts.

It does not contain naphtha, kerosene or paraffin which are all associated with operator skin dryness, cracking or dermatitis. It is electrically non-conductive at normal ranges found in the home. Care must be taken if used on some electrical plastic components where 'crazing' may occur. Test for suitability on painted surfaces before general application. A non-flammable CO2 propellant is used that in the large 500ml can size will deliver up to 15% more product than some 'like for like' butane propelled aerosols.

Does not contain silicone.

Drive Belt Dressing

Reduces slip on drive belts and helps to stop belt squeal. Can be used on drive belts exposed to weather, ideal for farm machines, alternator drive belts and fan belts. Helps to stop cracking and extends belt life. Can be used on rubber, leather, canvas and most types of synthetic belts. Size: 500ml Aerosol

Solent? Dry Moly EP Lubricant

The molybdenum disulphide lubricant particles are one micron or less in size allowing the product to adhere in the smallest surface irregularities. Fast drying at room temperature, the dry coating can be polished if required, to a high shine providing micro coating of lubricant for slides, bearings, chutes and conveyors. The dry film is resistant to pick up and resists the accumulation of debris. Ideal for fastener lubrication where it will prevent galling, particularly on stainless steel. Effective on foundry equipment where high temperatures up to 450C are common. Also suitable for open gear lubrication and any location where a wet coating is not acceptable or would burn off. Provides lubrication at extremely high load rates up to 100,000 psi. Suitable for all steels, copper, and brass components. No silicone content. Packed in a 500ml aerosol for economy in use.

Enamel Paint

This tough enamel has long lasting flexibility when used to cover rust, bare metal and wood, repelling moisture to give long term protection. It must be applied in temperatures of 5 C or above and is sag resistant to eliminate brush strokes, dilutable by white spirit and can be used for interior or exterior applications.

Enamel Paint

This tough enamel has long lasting flexibility when used to cover rust, bare metal and wood, repelling moisture to give long term protection. It must be applied in temperatures of 5 C or above and is sag resistant to eliminate brush strokes, dilutable by white spirit and can be used for interior or exterior applications.

Enamel Paint

High gloss rust covering enamel paint. Corrosion resistant, can be applied directly to rusty metal and repels moisture providing long term protection. Touch dry in 20 mins (subject to humidity/temperature), no need for primer or undercoat. Coverage 0.6m2 per 500ml can.

Smooth Finish - Aerosol

Enamel Paint

This tough enamel has long lasting flexibility when used to cover rust, bare metal and wood, repelling moisture to give long term protection. It must be applied in temperatures of 5 C or above and is sag resistant to eliminate brush strokes, dilutable by white spirit and can be used for interior or exterior applications.

Solent? Industrial Floor Paint

Solent? Industrial floor paints transform drab, stained or scuffed concrete and similar surfaces. Suitable for floors in warehouses, workshops, shop floors garages,
basements, etc.



Solvent free industrial quality floor paint. Applied by roller as a one-coat system, to provide traction in areas of slip hazard. Hard wearing, epoxy resin anti-slip coating suitable for use on concrete, stone, steel and wood.
Coverage: 5m2 per pack.
Application:
A pile-type roller (not foam) should be used to apply the mixed resin and curing agent which should be poured into a shallow roller tray.
Apply by roller to a measured area of 5m2.
Immediately sprinkle the anti-slip aggregate uniformly onto the wet coat to obtain the desired finished (total or light coverage).
Using the same roller, bed in and cover the aggregate. It is not normally necessary to recharge the roller unless very heavy quantities of grit have been applied.
Curing Time:
Curing time is affected by temperature and will be extended by low temperatures. Temperatures of 10C and below will arrest the curing of the product. In general, once the product has been applied, a period of 12-24 hours or longer should elapse before use. Avoid washing the surface for seven days after coating.

Solent? Layout and Marking

The Solent? range of industrial bullet point markers with liquid paint produce a clear and strong opaque result on any steel, aluminium, rubber, timber, plastic, ceramics and other materials .

Available in a range colours.

Liquid Paint Marker

Bullet tipped. 2.3mm point size.

Solent? Layout and Marking

The Solent? range of industrial bullet point markers with liquid paint produce a clear and strong opaque result on any steel, aluminium, rubber, timber, plastic, ceramics and other materials .

Available in a range colours.

Liquid Paint Marker

Bullet tipped. 2.3mm point size.