Enamel Paint

This tough enamel has long lasting flexibility when used to cover rust, bare metal and wood, repelling moisture to give long term protection. It must be applied in temperatures of 5 C or above and is sag resistant to eliminate brush strokes, dilutable by white spirit and can be used for interior or exterior applications.

Solent? Industrial Floor Paint

Solent? Industrial floor paints transform drab, stained or scuffed concrete and similar surfaces. Suitable for floors in warehouses, workshops, shop floors garages,
basements, etc.



Solvent free industrial quality floor paint. Applied by roller as a one-coat system, to provide traction in areas of slip hazard. Hard wearing, epoxy resin anti-slip coating suitable for use on concrete, stone, steel and wood.
Coverage: 5m2 per pack.
Application:
A pile-type roller (not foam) should be used to apply the mixed resin and curing agent which should be poured into a shallow roller tray.
Apply by roller to a measured area of 5m2.
Immediately sprinkle the anti-slip aggregate uniformly onto the wet coat to obtain the desired finished (total or light coverage).
Using the same roller, bed in and cover the aggregate. It is not normally necessary to recharge the roller unless very heavy quantities of grit have been applied.
Curing Time:
Curing time is affected by temperature and will be extended by low temperatures. Temperatures of 10C and below will arrest the curing of the product. In general, once the product has been applied, a period of 12-24 hours or longer should elapse before use. Avoid washing the surface for seven days after coating.

Solent? Industrial Floor Paint

Solent? Industrial floor paints transform drab, stained or scuffed concrete and similar surfaces. Suitable for floors in warehouses, workshops, shop floors garages,
basements, etc.

Synthetic Resin Based Industrial Floor Paint 5Ltr

Solent? Maintenance floor paint is supplied in 5 Litre tins that will cover up to 8m2 per litre of concrete floor. For the very best results Solent recommend 2 coats are applied to produce an attractive and hardwearing finish. Solent floor paint is easy to use, No primer is required and once dry, it is easy to clean, oil, grease and water resistant. Making it ideal for warehouses, garages and workshops etc.

*Please note, colours are for guidance only.

Solent? Layout and Marking

The Solent? range of industrial bullet point markers with liquid paint produce a clear and strong opaque result on any steel, aluminium, rubber, timber, plastic, ceramics and other materials .

Available in a range colours.

Liquid Paint Marker

Bullet tipped. 2.3mm point size.

Solent? Industrial Floor Paint

Solent? Industrial floor paints transform drab, stained or scuffed concrete and similar surfaces. Suitable for floors in warehouses, workshops, shop floors garages,
basements, etc.



Solvent free industrial quality floor paint. Applied by roller as a one-coat system, to provide traction in areas of slip hazard. Hard wearing, epoxy resin anti-slip coating suitable for use on concrete, stone, steel and wood.
Coverage: 5m2 per pack.
Application:
A pile-type roller (not foam) should be used to apply the mixed resin and curing agent which should be poured into a shallow roller tray.
Apply by roller to a measured area of 5m2.
Immediately sprinkle the anti-slip aggregate uniformly onto the wet coat to obtain the desired finished (total or light coverage).
Using the same roller, bed in and cover the aggregate. It is not normally necessary to recharge the roller unless very heavy quantities of grit have been applied.
Curing Time:
Curing time is affected by temperature and will be extended by low temperatures. Temperatures of 10C and below will arrest the curing of the product. In general, once the product has been applied, a period of 12-24 hours or longer should elapse before use. Avoid washing the surface for seven days after coating.

Enamel Paint

This tough enamel has long lasting flexibility when used to cover rust, bare metal and wood, repelling moisture to give long term protection. It must be applied in temperatures of 5 C or above and is sag resistant to eliminate brush strokes, dilutable by white spirit and can be used for interior or exterior applications.

Solent? Industrial Floor Paint

Solent? Industrial floor paints transform drab, stained or scuffed concrete and similar surfaces. Suitable for floors in warehouses, workshops, shop floors garages,
basements, etc.



Solvent free industrial quality floor paint. Applied by roller as a one-coat system, to provide traction in areas of slip hazard. Hard wearing, epoxy resin anti-slip coating suitable for use on concrete, stone, steel and wood.
Coverage: 5m2 per pack.
Application:
A pile-type roller (not foam) should be used to apply the mixed resin and curing agent which should be poured into a shallow roller tray.
Apply by roller to a measured area of 5m2.
Immediately sprinkle the anti-slip aggregate uniformly onto the wet coat to obtain the desired finished (total or light coverage).
Using the same roller, bed in and cover the aggregate. It is not normally necessary to recharge the roller unless very heavy quantities of grit have been applied.
Curing Time:
Curing time is affected by temperature and will be extended by low temperatures. Temperatures of 10C and below will arrest the curing of the product. In general, once the product has been applied, a period of 12-24 hours or longer should elapse before use. Avoid washing the surface for seven days after coating.

Foaming Cleaner Spray

Cuts through grease, dirt, oil and general soiling, contains no silicones. Ideal for non-porous surfaces. 10001 uses in the home, industry, garage or factory. Size: 400ml aerosol.

Enamel Paint

This tough enamel has long lasting flexibility when used to cover rust, bare metal and wood, repelling moisture to give long term protection. It must be applied in temperatures of 5 C or above and is sag resistant to eliminate brush strokes, dilutable by white spirit and can be used for interior or exterior applications.

Solent® Maintenance Sprays and Lubricants

Solent® Maintenance Sprays and Lubricants are a comprehensive range of products for use in the workshop and the office.

SZ1-500B Cold Zinc Galvanising Spray

Solent® SZ1-500B Cold Zinc Galvanising Spray provides fast drying corrosion protection and once dry will match the colour of newly galvanised metal. Ideal for protecting welded joints in galvanised structures. Can be used as a topcoat or primer. Compatible with most paint finishes. Contains no CFC's or lead. Fitted with directional spray button designed to assist application in outdoor locations with minimum over-spray.

Manufactured and tested to:
ASTM B117 (Hot Salt Spray)
BS AU 148:PT14 1969 (Natural Weathering)
DIN EN ISO 12944-1 (Corrosion Protection of Steel Structures)

500ml aerosol.