Kennedy Soft Faced Hammer

Kennedy soft-faced hammers have composite material striking faces that DO NOT have any metal in them that would mark the surface of the work piece. They are a safer alternative for striking machined surfaces than conventional steel hammers that would damage the surface. The impact-resistant composite material striking face shapes itself to the component being struck, minimising rebound damage to the component and reducing noise pollution in the work place.

Nylon Faced Hammer

Kennedy Nylon faced striking hammers have no metal in the hammer faces that can mark the work piece. Each hammer has two replaceable screw-in nylon hammer faces that can be easily replaced when they become worn, without the use of any other tools - minimising down time. The striking faces are reinforced for extra strength and to prevent fracturing from off centre strikes. The nylon hammerheads have a precision moulded screw thread that screws securely into the chrome plate zinc hammerhead, which in turn is fixed to a fully moulded polypropylene shaft with a shock absorbing soft dual material grip, for improved grip and control.
Overall length: 305mm.

For all dimensional specifications please refer to our catalogue.

Facom 39 Short Combination Wrenches

To ISO 7738, NF ISO 7738. Short shank and compact heads. Ideal where access is restricted. 12-point ring angled at 15°. 6-point ring angled at 15°. Satin chrome finish.

Metric

1/4" Hexagon Titanium Coated Screwdriver Bits

Kennedy quality titanium screwdriver bits that provide an improved wear resistance to protect gripping points from the rigors of repetitive use. For use with hand and power tools.

Aviation Tin Snips

Manufactured from the finest industrial quality drop forged chrome vanadium steel hardened to 54 - 58 Rockwell with ground cutting edges, for clean accurate cuts. The double fulcrum compound action magnifies the pressure applied by the user making it easier to cut. Spring loaded to allow easy single-handed operation. The handles are coated for improved comfort, control and have anti-slip guards for extra safety. Thumb lock ensures the jaws are closed when not in use. Suitable for use on mild steel and other non-ferrous materials. Capacity: up to 1.2mm cold rolled steel sheet.



Offset Right Hand (Heavy Duty) - Cuts right and straight. Ideal for cutting circles.

Auger Bits

American pattern with solid single twist, precision machined for perfect concentricity manufacrtured from hardened carbon steel, the flute is ground and honed to cut along its entire length. Spur point ensures accurate location at the start of drilling. Hexagon shank for use with hand and power tools.

Carbon Steel Non-Sterile Blades

Non-sterile, for use with No.3 type handle

No.15

5/16" AF Hexagon 'Desoutter Shank' Bit Adaptors

5/16" hexagon shank with Desoutter style ball locater. For use with insert bits.

Magnetic

Open Jaw Slogging Wrenches

Manufactured to DIN 133.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Barrel Taps

Flame arrestor. Spout rotates through 360°. Teflon seal. Heavy duty. Lockable.

Stainless Steel Body - BTSSS

Mechanical Puller - 2 & 3 jaw Industrial Kits Reversible/Double Ended/Adjustable

Manufactured from chrome vanadium steel. Each kit contains the components to assemble a 2 or 3 jaw external or internal puller. The legs can be set at 2 different height positions.