Norbar Torque Wrenches

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS).

1/2" Square Drive 'P' Type Ratchet (Pre-set)

Designed for the production environment where they will be set and then dedicated to a particular application. There is no scale, the wrench must be set against a Torque Wrench Analyser or similar instrument. Setting system is designed to discourage unauthorised alteration. Coloured end seals are provided to identify the wrench to a particular operator, torque setting or calibration period. With reversible ratchets.

Torque Range: 30-300Nm 22-220ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

Commercial Duty Circuit Tester 6 to 24V

Suitable for use with power on. For 6/12/24V automotive systems only. Locates shorts, earths & open circuits. Probe length, 103mm. 1.4m heavy duty lead with spring strain relief. Super sharp stainless steel probe to test through wire insulation.



Super sharp tempered steel probe circuit tester to test through wire insulation when power is switched on. Tests 6, 12 & 24V an automotive system only, locates earth, short and open circuits. Tester is fitted with a 1.4m heavy-duty lead with spring strain relief, 103mm probe and a strong semi-transparent plastic handle.

250mm Insulated Extension Bar

250mm fully insulated extension bar. Quality tested and insulated to 1000V AC. Conforms to BS60900 standards.
1/2" square drive.

Kennedy Professional Ai-Bronze Spark Resistant Safety Tools

Spark resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapors or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.

Combination Spanner

Rubber Mallets

Soft faced for use where steel hammers would mark the surface.

Hickory Shaft.

1/4" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Tri-Wing

Chrome Molybdenum Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

BSW Deep

1/2? Drive BSW Size, Deep Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

Cable Ties

Suitable for securing or retaining various shapes and sizes of object.

Knife Blades

Wood and metal saw blades suitable for use with all fixed blade trimming knives. 19tpi. Size 190mm long.

1275

TP-1 Surveyors Tripod

Stanley tripod to suit Stanley laser products. Height adjustment: 970mm - 1600mm.