1/2" Square Drive Screwdriver Bits

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. For insertion and removal of fasteners and fixings using 1/2"square drive tooling. Unique knurled body gives extra grip which is essential for a quick tool change when your hands are greasy/oily. Registered Design No. 2053516UK. Manufactured from chrome vanadium steel and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. All have ball retaining groove on each face of the square drive. Overall length: 55mm. Bit length: 17mm. Conforms to DIN standards.

Hexagon

16mm Spigot End Fittings

Inch

Open End

Kennedy® Standard Industrial Terminals - Blue Fork

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.

Finishing Picks

Highly polished striking heads and cheeks. With crowned faces. Will remove low spots when metal finishing. Hardwood shaft and finishing beater. Manufactured to BS 4114.

Curved Pein Panel Beater

Medium weight for general use where access is difficult.

Swedish Pattern Pipe Wrenches

Narrow design for confined areas, used for gripping pipe and nuts. Forged chrome vanadium heat treated steel. Knurled adjusting nut with guiding reinforcement on handle. Conform to DIN 5234.

"S" Type

"S" shaped jaws grip at three points to ensure a maximum grip.

Kennedy® Long Parallel Pin Punches With Air Grip

Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. Fitted with an air grip handle that absorbs vibration as well as deflecting wayward hammer blows.

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

3/8" Square Drive Bi-Hexagon Sockets

Chrome vanadium. Bi-hexagon. (12 point). All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all 3/8" drive accessories.

Metric

Insulated Spanners

Manufactured from chrome vanadium steel. Spanner dimensions conform to DIN 7447. Fully insulated to conform to VDE 0680/201, IEC 900 & BS EN 60900 standards for safe electrical applications up to 1000V.

Insulated Single End Ring Spanners

Fitch Brushes

Natural white bristle flat fitch paint brush with long natural wooden handle and steel ferrule. Ideal for ‘cutting-in’ to corners and windows, painting coving and other detail painting, or used dry to clean/dust on delicate objects or hard to access areas.

Round Type