Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DAM982 Autoranging Digital Multimeter

Ideal for electrical and electronic engineers. Automatic range and over range indication. Ten position rotary switch. Large, 25mm digital display with backlight. Measures DC voltage, AC voltage, resistance, capacitance, frequency, other functions include auto and manual range modes, relative measurement, data hold, diode test, continuity test and duty cycle test function Supplied with 9V battery protective cover and stand, test probes operators' manual and deluxe fitted nylon case. Complies with IEC1010 for measurement on 600V Cat III installations.

Display: 3999 COUNTS. 25mm High digital display.
DC Voltage: 400m/4/40/400V/-0.7%, 1000V/-0.8%
AC Voltage: 4/40/400V/-0.8%, 750V/-1.0% (40Hz to 400Hz)
DC Current: 4000 mu /400ma/-1.2%, 10A/-2.0%
AC Current: 4000 mu /400ma/-1.5%, 10A/-3.0% (50Hz to 400Hz)
Resistance: 400/4K/40K/400K/4M?/-1.2%, 40M?/-2.0%
Capacitance: 4nf/-5.0%, 40n/400n/4 mu /40 mu /200 mu F/-3.0%
Frequency:10/100/1000/10K/100K/1000K/10mhz/-2.0%
Duty cycle: 0.1%99.9%/-2.0%
Diode test autorange and manual range relative measurement data hold back light Power: 6F22(9V) x 1 Size: 185 x 84 x 38mm
Weight: 285g (including battery)

16mm Spigot End Fittings

Metric

Open End

Seal Puller Tool

Two size tips allow you to remove oil or grease seals from virtually anything including wheel bearings, transmission housings, etc. Hardened and tempered carbon steel shank and head with oxidised finish tips. Chrome plated shank for protection against corrosion. Impact resistant square section handle for secure grip even when greasy. Overall length: 310mm (12 1/4")

Kennedy Professional Ai-Bronze Spark Resistant Safety Tools

Spark resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapors or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.

Non-Sparking Screwdriver (Crosspoint)

Industrial Combination Spanners

Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm - 25mm, 1/4" - 1" AF - DIN 3113.
26mm - 95mm, 11/16" - 2" AF - ASME B107.6.
1/8" - 1/2" Whitworth - DIN 3113 & BS192:1982.
9/16" - 7/8" Whitworth - ASME B107.6 & BS192:1982.

A/F

Kennedy Comfort Grip Scrapers (Scale Tang)

Heavy-duty, with scale tangs, tempered flexible steel blades and bi-material comfort grips. Available in 3 blade widths: 1", 2" and 3".

Kennedy Cold Chisels

Kennedy cold chisels are manufactured from high quality, high strength octagonal section chrome vanadium steel with ground cutting edges. They are are used to channel brickwork, concrete, chip stone and to remove waste metal when a very smooth finish is not required or when the work cannot be done easily with other tools, such as a hacksaw, file, bench shears or power tools. The head of each chisel is chamfered to slow down the formation of the mushroom shape caused by hammering. Conform to: BS3066.

3 Piece Flat Chisel Sets

Used by the engineering and building trades for cutting and chipping cold metals, brick work and stone. The angle of the cut edge should be 60 - 70, inclusive, but is dependant on the material to be cut. When cutting metal, the softer the material is, the more acute the cutting angle should be.

1" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

BSW

1? Drive BSW Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

45° Insulated Snipe Nose Pliers with Cutter

Heavy-duty insulated handle with slip guard. Double polished head and joint with induction hardened cutting edges. Serrated jaws with side cutter.

Industrial Flared Nut Ring Spanners

Made from high quality chrome vanadium steel. Satin finish body with highly polished heads. Offset ends.

Metric

Conform with ANSI B107.9M.