Feeler Gauges

Quality industrial with hardened and polished taper blades, enclosed in a steel case. Blades are clearly marked for easy identification.

Inch: Manufactured to BS 957: 2008 Part 1 Imperial.

26 Blade: .0015", .002", .0025", .003", .004", .005", .006", .007", .008", .009", .010", .011", .012", .013", .014", .015", .016", .017", .018", .019", .020", .021", .022", .023", .024" & .025".

Kennedy Screwdriver Bits

Kennedy's PBS040 Hexagon Power Bit Set contains forty of the most commonly used bits in the workshop or industry today. All bits are manufactured to the highest industrial standards and tolerances from hardwearing Chrome Molybdenum. The Hexagon bits can either be used with a power impact drive or a 3/8" or 1/2 " square drive ratchet wrench using the adaptors supplied in the set. They are suitable for general workshop and manufacturing use.

The set contains Hexagon, Torx & Spline bits with 3/8" & 1/2 " x 10mm Bit Adaptors that are suitable for hand and power impact drivers.

PBS040 10mm 40 Piece Hexagon Power Bit Set

Kennedy's PBS040 Hexagon Power Bit Set Contents:
3/8" and 1/2 " Square x 10mm Hexagon Bit Adaptors
75mm x 10mm Hexagon bits
Hexagon: 4, 5, 6, 7, 8, 10, 12mm
Torx: TX20, TX25, TX30, TX40, TX45, TX50, TX55
Spline: 5, 6, 8, 10, 12mm
30mm x 10mm Hexagon bits
Hexagon: 4, 5, 6, 7, 8, 10, 12mm
Torx: TX20, TX25, TX30, TX40, TX45, TX50, TX55
Spline: 5, 6, 8, 10, 12mm.

Kennedy Professional Ai-Bronze Spark Resistant Safety Tools

Spark resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapors or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.

Non-Sparking Screwdriver (Crosspoint)

Kennedy Screwdriver Bits

Kennedy screwdriver bits are manufactured from high alloy chrome molybdenum steel (hardness 58-62HRC) ideal for hand and power tool use.

6mm (1/4”) Hex No.3 PZ Screwdriver Bits

Insert Bits. Plain shank for use with bit adaptors etc.

Senator® Hand Stamps

Standard quality, with strength up to 800N/mm2. Hardness at the engraving: 58 - 60HRC. Type of characters according to DIN 1451.

Letter & Number Stamps

Sash Clamps & Lengthening Bar

Used for a wide range of long reach clamping applications. SG ductile cast iron heads and slides, bars are manufactured from bright drawn steel. Main screw and handles are made from high grade steel. Unique spring load pin mechanism. For quick and easy adjustment. Can't drop out during use.

PVC Tool Bag

The PVC makes the tool bag puncture-resistant, waterproof and rot-resistant. PVC holdall riveted leather handle and straps with metal buckles, fibre board base and top.

Kennedy Crowbars, Wrecking bars and Pry bars

Manufactured from carbon steel. These traditional designs are used by tradesmen in all industrial environments. Suitable for a wide range of general duty applications, ideal for dismantling timber constructions, opening packing cases and removing nails (depending on the type of bar). Also used in assembly applications offering safe leverage and alignment capability.

Chisel & Point Crowbar

For heavy duty levering and dismantling work, the angled heel blade offers greater leverage.

Miniature Open Ended Spanners

Conform to BS 192 : 1982 & DIN 3110.

Metric

Kennedy Replacement Punches

To suit Kennedy Power Punch Kit (KEN-560-7800K)