Industrial Combination Spanners

Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm - 25mm, 1/4" - 1" AF - DIN 3113.
26mm - 95mm, 11/16" - 2" AF - ASME B107.6.
1/8" - 1/2" Whitworth - DIN 3113 & BS192:1982.
9/16" - 7/8" Whitworth - ASME B107.6 & BS192:1982.

A/F

Double-Ended Box Spanners

For use in confined areas where there is not enough space to fit a normal spanner at 90. Typically used in a car engine to reach down into a spark plug recess or similar. Tommy bar available separately (MEL-581-1136G).

Metric

Kennedy® Standard Industrial Terminals - Blue Blade

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.

Single & Bi-Hexagon Sockets

The most popular drive size used in the service and maintenance industry. This popularity is due to the strength and robust nature of 1/2" drive. All Kennedy Professional sockets are knurled to give a high grip which is essential for a quick tool change even when greasy/oily. Made from chrome vanadium and fully chrome plated with a mirror finish. Aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.

AF Deep

Spare Jaw & Nut

To suit Kennedy Standard Duty Pipe Wrenches

TruTorque TT50 3/8" Sq Dr Torque Wrench 13264

In engineering the new TruTorque range we have paid close attention to accuracy, ease of setting and comfort in use.

Durability has been a primary development goal - both in terms of the lifetime of components and longevity of calibration accuracy. Cycle testing of wrenches at full torque was a key element of the development process and, in total, several million tightening cycles were accumulated. The result is a product that you can use with complete confidence that you have the best tool for the job.



Product's Accuracy: +/-3%
Operates between: 6-35 lbf.ft / 8-50 N.m

Technical Specification;
* Length: 278mm
* Square Size: 3/8"
* Weight: 0.5Kg
* Ratchet Diameter: 30mm
* Engagements per Revolution: 72

* Accuracy: +/-3% of reading exceeds all international standards for torque wrenches. Each wrench is supplied with a traceable calibration certificate.
* Micrometer Scale for simple and error free setting. (On dual scale wrenches, the micrometer increment applies to the N.m scale.)
* Quick and Light Adjustment: adjustment over the entire scale can quickly be achieved and with minimal effort in approximately ten complete turns (exact number varies by model).
* Versatile Ratchets: the tough ratchets are reversible and have narrow engagement angles of 5° to allow easy positioning of the tool in the tight confines of today's vehicles and machines.
* Comfortable, Durable Handle: the handle is constructed using two materials; a base material for strength overlaid with a soft feel grip for comfort and slip resistance.
* Adjustment Lock: all models feature a lock to prevent accidental adjustment of the set torque.

Kennedy Aluminium Pipe Wrenches

Jaws are serrated in the opposite direction to ensure a secure grip. Used mainly in the plumbing industry for gripping pipes and nuts. Lightweight aluminium alloy handles. As robust as heavy duty cast iron wrenches. All moving parts are heat treated.

1/4" AF Hexagon 'Direct Drive' Bit Adaptors

1/4? hex. drive.

Socket Adaptor 1/4" Square Drive Male

Speed Clamps and Spreaders

Speed clamps are designed for fast and convenient clamping in many applications, versatile and easy to use where traditional clamping methods may not be suitable.

OSC100 100mm (4") One Handed Speed Clamp

Manufactured from pressed steel for strength and durability. Trigger adjustment based on the sealant cartridge applicator gun. Quick release thumb lever.
High strength hexagonal steel thrust rod with swivel shoe for clamping non parallel surfaces. High strength plastic contact pads.

Clamping capacity: 100mm.
Frame size (H x W x D): 170 x 300 x 45mm.

Open Jaw Slogging Wrenches

Manufactured to DIN 133.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.