Carving Knives

All Granton knives are available with a choice of red, blue, yellow, green, brown, white or black handles. This system helps prevent cross contamination by assigning coloured handles to particular work areas.



This particular knife is ideal for cutting large sized roasts or large cakes. Features special half moon serrations which enable the user to cut items that have a soft centre without crushing it.

Overall length: 15 1/2''.
Stainless steel blade.
Dishwasher safe.

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

1200 Series Cabinets

Manufactured from heavy gauge steel, painted finish with transparent polypropylene drawers, allows contents to be viewed when the drawer is closed. The lip on the rear of the drawer allows it to be opened fully without falling out. All the drawers can be sub divided to meet specific storage requirements. The cabinets can be stacked or mounted to the wall to maximise use of storage space.

60 Drawer

Drawer size: 35mm high x 52mm wide x 135mm deep

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Kennedy Professional Ai-Bronze Spark Resistant Safety Tools

Spark resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapors or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.

Ring End Slogging Wrench

With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Mechanics Screwdrivers

Featuring a classic slimline design favoured by the automotive industry. Black high impact plastic handles. Chrome finish alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life. Flat blades have hexagon bolster to allow extra torque to be applied using a spanner.

Crosspoint

Spare Striking Faces For Thor Hammers

Easy to change, simply screw in. The striking faces are colour coded to allow easy identification of material type and hardness.

White

Hard nylon shore D61-65. All purpose face suitable for light and heavy duty applications.

'Hi-Grip' Screwdrivers

Designed for maximum grip under load application. The red moulded cushion grip gives optimum operator comfort. Ideal for assembly work. Tough alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life.

Flared

Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head.

Thor Soft Faced Hammers

A safer alternative for striking machined surfaces than conventional steel hammers. The impact resistant striking faces shape themselves to the component being struck, minimising rebound damage to the component and reducing noise pollution in the work place. The striking faces can be easily replaced once they have become worn. Available as standard, with a choice of 5 interchangeable face types:

Copper Face

Malleable iron head with two pure electrolytic copper faces, for high impact blows. Solid wooden handle.

Kennedy® Nail Punches

Cupped and bevelled precision ground points provide accurate positioning over the nail head for efficient depression. Manufactured from hardened and tempered steel, with a knurled body for extra grip. Conform to BS3066. (Hardness: Heads 42 HRC Max: Points 52-58 HRC).

100mm (4") Overall Length