Kennedy Hexagon Key L-Wrenches

Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish.

Industrial Combination Spanners

Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm - 25mm, 1/4" - 1" AF - DIN 3113.
26mm - 95mm, 11/16" - 2" AF - ASME B107.6.
1/8" - 1/2" Whitworth - DIN 3113 & BS192:1982.
9/16" - 7/8" Whitworth - ASME B107.6 & BS192:1982.

Metric

Deep 5 Drawer Toolchest

Manufactured from heavy gauge steel with double wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides. Supplied with top mat and drawer liners. Fully locking. Drawer loads should be evenly distributed.



Over 25% deeper than standard size tool chests for extra storage. Overall dimensions: (W x D x H): 660 x 405 x 510mm. Drawer dimensions ((W x D x H): 3 595 x 405 x 510mm.2 595 x 405 x 100mm.

Q-MAX Cutters

The non-rotating metal hole cutter is manufactured from high tensile steel heat treated for a long keen cutting life providing burr free accuracy time after time.

To produce the hole a small pilot hole is drilled allowing a connecting bolt to join the punch on one side and the die on the other side of the materials. Pressure is then applied by tightening the bolt and thus the hole is literally punched out.

Capacity:
Mild steel up to 16swg (1.62mm).
Stainless steel up to 16swg (1.62mm).
Sheet copper, brass and aluminum up to 2.0mm.
Plus many other sheet materials and ductile plastic.

Other sizes available on request. Inch 3/8" to 1,3/4 ". Metric 10mm to 80mm. Plus squares and rectangles.

Metric

Locking Pliers - Long Nose with Wire Cutter

For access in narrow spaces which cannot be reached with conventional grip pliers. Used for clamping, tightening bolts or to extract items in hard to reach places.

Available in 3 sizes:
4LN
Overall length 100mm.
Jaw capacity: 38mm.

6LN
Overall length 150mm.
Jaw capacity: 51mm.

9LN
Overall length 225m.
Jaw capacity: 70m.

Fry Bakers Soldering Fluid No.3

A specially formulated liquid flux that is ideal for soldering and tinning of copper and tinned materials. Easy to apply. Fast acting economical in use, ensuring sound strong joints. For clean, positive joint preparation. For tinned materials and copper.

Kennedy® Deep Pot Magnets

North polarity in centre separated from opposing pole by a continuous slot. Ideally suited for gripping applications. Supplied with M6 x 1 threaded bore fixing hole and keeper. Can be used in temperatures up to 550C.

Spare Blades for General Purpose Saw

73-66SR for general work. 73-77SR for wood.

Kennedy 10 Tonne Body Repair Kit

Used for clamping, pulling, bending, straightening, spreading and lifting operations. Snaps together quickly. Heavy duty hand pump has automatic overload feature. Tough, blow moulded case. Strong flexible hose with spring guards at both ends. Hydraulic hand pump, ram and spreader.

Heavy Duty G-Clamps - Copper Plated Screw

All sizes feature good throat clearance, a copper-plated screw, reinforced shoulders for greater strength, a swivel clamp head and a sliding tommy bar for tightening. Manufactured from drop forged ribbed anti-twist frame steel, ideally suited to fabrication and welding applications. Finished in a heavy epoxy coating for long-term rust and weld spatter resistance.