Spares

To suit hand pumps

Repair kit

16mm Spigot End Fittings

Metric

Flare End

Kennedy 300mm/12" Girder Section Spirit Level

Industrial quality with three factory set vials, horizontal and 2 plumb, aluminium body with powder coat finish. Accuracy: 0.75mm/m. Top face marked with metric and imperial graduations.

Inch

High mechanical performance combined with compact design complying with aeronautical standards:
Ring heads:
Ring clearance designed for better access to recessed or closely spaced screws. 12-point OGV profile for a high torque without damaging the nut. Angled at 15°.
Open-ends:
Optimised open end / handle geometry for increased accessibility. Ground contact faces. Satin chrome finish.
Industrial and automotive : ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1, NF E74-306. W Aerospace: SAE AS 954E.



Open end profile is designed to allow greater accessibility & turning arc versus standard pattern combination wrenches. Ring end is thin walled with a high relief zone for greater access to recessed and hard to access bolts. Open ends have mechanical characteristics above and beyond NF ISO 1711 - 1. Ring ends are designed to outperform Aerospace SAE AS 954E Standards.

Senator® Chrome Vanadium Adjustable Wrench

Manufactured from "I" beam section chrome vanadium steel for improved strength and rigidity, the jaws are heat treated for extended tool life. High polished corrosion resistant chrome finish. 22.5 offset head angle for positive torque control. Slimline tapered jaws for improved access into confined spaces. Parallel jaws with smooth jaw adjustment and self-locking design prevents the jaws opening unintentionally even when under full load. Suitable for industrial engineering, automotive, aerospace, maintenance and assembly applications.

Kennedy® Pin Vices

Manufactured from hardened steel, with reduced diameter knurled body for rapid rotation of the pin vice between the thumb and forefinger. Ideal for holding drills, small files and wire. The through hole construction of the body allows lengths of wire to be held.

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Chrome Molybdenum Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Metric Deep

3/4? Drive Metric, Deep Length, 6-Point
Conform to: DIN 3129.

Kennedy Spring Compressor Set

Hardened steel screws & cast steel claws. 2 legged. Central hexagonal drive with wrap over coil claws. Can be reversed for spreading applications. Use with 21mm (3/16") AF spanner. Maximum jaw opening: 250mm.

Q-Torq Torque Calibration Analysers

Clear easy to use scales. Specifically designed to set and calibrate most makes of torque tools. Mechanism is totally enclosed in a die cast aluminium housing. Repeatable accuracy to plus/minus 2% of reading. Memory pointer and built-in needle shock absorber. Single direction mechanism for clockwise use. The preferred and certified ranges of these torque calibration analysers meet the specified measuring range as detailed in ISO 6789 : 2003.

QCA 1200

Torque range:
ISO 2.4 - 12cNm.
Inch 24 - 120lbf.in.
Scale sub divisions:
0.2Nm, 2lbf.in.

QCA 2500 model illustrated.