Direct Drive Bits for Power Tools

1/4" Hex with ball recess.

Pozidriv

1" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Metric Deep

1? Drive Metric, Deep Length, 6-Point
Conform to: DIN 3129.

Standard Series Torque Multiplier

The 'Standard series' torque multiplier has been designed for the specialist user where it is necessary to provide higher torque than would otherwise be possible due to limitations on space or operator strength. This series employs multiple stage epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. The torque multiplication is accurate to more than plus/minus 4% with a maximum output of 47,500Nm. *Models contain the AWUR 'anti wind up ratchet' mechanism. As with any high ratio gearbox (25:1 or more) a certain amount of wind-up (spring) has to be taken up before any useful tightening work can be applied to the nut. Each time the input device is released, the wind-up will rotate back against the direction of operation.The AWUR mechanism retains all of the wind up forces as they are created locking the multiplier onto the nut being tightened. This means that even when used upside down the multiplier will support it's own weight.



Torque Range: 3400Nm 2500 Ibf.ft
Square Drive: 3/4 '' Input 1'' Output

For further specification on this product please see the attached PDF under the catalogue PDF links tab.

1/4" Hexagon Titanium Coated Screwdriver Bits

Kennedy quality titanium screwdriver bits that provide an improved wear resistance to protect gripping points from the rigors of repetitive use. For use with hand and power tools.

Chrome Finish Adjustable Wrenches

Kennedy industrial quality adjustable wrenches are manufactured from high strength 'I'-beam section chrome vanadium steel for improved strength and rigidity; the jaws are hardened and ground for extended tool life. An offset head angle of 22.5 provides positive torque control and the 15 slimline tapered jaws allows the wrench to be used in confined areas of access. The Kennedy adjustable wrench jaw opening exceeds ISO standards, providing you with up to 20% greater jaw capacity than conventional adjustable wrenches. Parallel jaws with smooth movable jaw adjustment and self-locking design prevent the jaws opening unintentionally even when under full load. Suitable for industrial and maintenance/assembly applications.

Highly Polished Corrosion-Resistant Chrome Finish

TorqueVario-S torque screwdriver set 13 pieces.
1.0 to 5.0Nm range with step-less adjustment set via the window scale.
Ergonomic SoftFinish grip for comfort during repetitive tasks.
Light, compact, modern design.
Calibrated, certified and traceable to EN 6789 with an accuracy of +/-6%.

Also compatible with Wiha’s one piece torque blades for unrivalled access in tight spaces.

Kit Contents:
Metal box with cut-foam insert contains TorqueVario-S torque screwdriver, setter, bit holder and 10 of ¼” bits.
Phillips PH1 PH2, Pozi PZ1 PZ2, Torx T10 T15 T20 T25, Hex 3mm 4mm.

26893 Engineer's Torque Screwdriver Set

Paper Hanging Brush

Polished wooden handle. Soft pure bristles. For smoothing out air bubbles when hanging wallpaper.

Bulldog Garden Fork

Manganese steel forged socket and head with a varnished hardwood shaft and polypropylene PD handle.

Digging Fork - 7103

Used for loosening soil, aeration, and turning. Blade width: 190mm. Overall length: 1000mm

Chrome Molybdenum Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

AF Deep

1/2? Drive Inch Size, Deep Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

Adjustable Hacksaws

Traditional hacksaw with die cast 'D' style handle and solid frame. The blade can be adjusted to fit at right angles to the frame.