Line of Chords & Circumference

Manufactured from hardened steel, polished and ground finish, precision etched for accurate measurement. The rules can be used to measure diameters up to 600mm (24") and the equivalent circumference can be read directly from the rule, totally eliminating the need for calculating the circumference. The line of chords scale on the rule, when used in conjunction with dividers allows angles to be set or measured.

Rutland Garden Furniture

These side panels are for use with the Rutland FGS300 gazebo (Order Code: RTL-984-2000K).

The Set consists of four side panels with hook and loop fasteners:
2x sides with large arched PVC windows.
2x sides with zipped doors for easy access.

For the full gazebo see Order Code: RTL-984-2000K.

Gazebo Side Panels Set of 4

Chrome Molybdenum Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

BSW

1/2? Drive BSW Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

1/2" Square Drive Torx Sockets

Chrome vanadium. For use with male headed TX fasteners commonly found in the automotive industry. Overall length: 37mm.

Kennedy® Standard Industrial Terminals - Yellow Ring

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.

High Grip Pound Thru' Screwdriver Set

Supplied in display box. Contents: Crosspoint No.1 x 75mm, No.2 x 100mm, No.3 x 150mm. Flared 6 x 100mm, 6 x 150mm, 8 x 200mm, 9.5 x 250mm.

Metric Open Ended Set 6-19mm (7 Pieces)

Through blade screwdriver with chrome vanadium steel blades and striking heads, suitable for striking with a hammer to free up seized screws. Fully hardened magnetic tips. Comfortable moulded grip. Hexagon blades.

Feeler Stock Coil

This handy product is housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. The stock is also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm. The case provides the ability to snip off the desired length without any waste.

12.7mm x 7.6m

Suction/Coopers Plunger

Suitable for unblocking WC pan wastes and gullies. Flexible rubber suction disc with a rigid, finely sanded wooden tee handle.

Kennedy® Standard Industrial Terminals - Red Blade

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.

Kennedy® Button Magnets

A horse shoe type cylindrical magnet. Opposing poles are at the same end of the magnet separated by a slot. Supplied with a plain bore and keeper. Permanently magnetic. Can be used in temperatures up to 550C.