Crowfoot Wrenches

Chrome vanadium wrenches designed to be used for getting into tight spots and hard to reach areas, in particular around tubing such as hydraulic lines and etc.

Crowfoot Wrenches

For use with with 3/8" square drive tools.

Extra Long Circuit Tester 6 & 12V

Suitable for use with power on. For 6 & 12V automotive systems only. Locates shorts, earth & open circuits. Extra long probe length: 185mm 1.7m heavy duty lead with spring strain relief Super sharp tempered steel probe to test through wire insulation.



Super sharp tempered steel probe circuit tester to test through wire insulation when power is switched on. Tests 6 & 12V automotive systems only, locates earth, short and open circuits. Tester is fitted with a 1.7m heavy-duty lead with spring strain relief, 185mm probe and a heavy-duty transparent plastic handle.

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Square Mouth Shovel

Forged high carbon steel blade coated with corrosion-resistant epoxy paint. Weather-proofed solid ash shaft secured in the socket by an aluminium rivet for maximum stability. Suitable for concrete mixing, working tarmac, moving sand or ballast and clearing out or back filling trenches.

2521-NC

Type: hardwood shafted.
Handle type: T-hardwood.
Shaft: hardwood.
Blade material: carbon steel, powder coated, varnished.
Blade width: 370mm.
Blade height: 305mm.
Overall length: 1080mm.

1/4" Hex. Drive Adjustable Reversible Precision

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



Non length-dependant wrench, remaining accurate regardless of hand position. Accuracy of +/-3% exceeds normal torque wrench standards. Supplied with coloured end seals to identify the wrench on the production line to an operator, torque setting or calibration period. With calibration certificate fully traceable and suitable for ISO9000 assessment purposes. Overall length 170mm.

Torque Range: 10-50ibf.in

For further specification on this product please see the attached PDF under the additional information tab.

Screwdriver Sockets

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. For insertion and removal of fasteners and fixings using 3/8"square drive tooling. Unique knurled body gives extra grip which is essential for a quick tool change when your hands are greasy/oily. Manufactured from chrome vanadium steel and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. All have ball retaining groove on each face of the square drive. Overall length: 50mm. Bit length: 20mm. Conforms to DIN standards.

Torx

Engineers' & Electricians' Screwdrivers

Kennedy Engineers' & Electricians' Screwdrivers have a traditional fluted design handle. High quality steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life. This range offers the widest choice of blade selection and blade length. The high impact plastic handles are acid and oil resistant. A comprehensive selection to meet the demands of modern industry.

Flared - Round Blade

Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head.

Nut Spinner Set

Hardened and tempered chrome vanadium steel, polished chrome finish. Oil and acid resistant high impact plastic handles. 6" (150mm), combined socket and blade length. Overall length: 245mm.

Industrial Combination Spanners

Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm - 25mm, 1/4" - 1" AF - DIN 3113.
26mm - 95mm, 11/16" - 2" AF - ASME B107.6.
1/8" - 1/2" Whitworth - DIN 3113 & BS192:1982.
9/16" - 7/8" Whitworth - ASME B107.6 & BS192:1982.

Whitworth

Board Lifter

Makes the positioning of plaster boards easier. Strong one piece aluminium construction.