9" Short Pile Sleeve

For use with emulsion paint on smooth surfaces. Slipped on or off roller frame quickly for ease of use and cleaning.
Dimensions: 9" x 1.5" (225 x 38mm) diameter.
Gross Weight: 70g

1" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Metric

1? Drive Metric, Standard Length, 6-Point
Conform to: DIN 3129.

Ring Slogging Wrenches

Manufactured to DIN 7444.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Wooden Sash Brushes

Wooden handle with steel ferrule.

Kennedy Professional Ai-Bronze Spark Resistant Safety Tools

Spark resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapors or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.

Open End Slogging Wrench

With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Scutch Bit Holders, Combs & Droves

Kennedy cold chisels are manufactured from high quality, high strength octagonal section chrome vanadium steel with ground cutting edges. They are are used to channel brickwork, concrete, chip stone and to remove waste metal when a very smooth finish is not required or when the work cannot be done easily with other tools, such as a hacksaw, file, bench shears or power tools. The head of each chisel is chamfered to slow down the formation of the mushroom shape caused by hammering. Conform to: BS3066.

Detachable Bits for Scutch Chisels & Hammers

These are made for use in comb holder chisels and hammers, both edges can be used until worn out and then thrown away. Designed to dress stone or brickwork or plaster rendering, etc. Available in 25/38mm widths either plain edged or coarse.

10-19mm Flex Head Ratchet Wrenches

Open ended spanners. Flex head ratchet ring spanners. Square drive ratchets: 1/4", 3/8" and 1/2" drives. Chrome vanadium. Fully chrome plated with mirror finish. Heavy duty fitted storage case. Contents: ratchet combination wrenches bi-hexagonal (10mm - 19mm inclusive).
Quick release square drive adaptors - 1/4" SD (x10mm hex);
3/8" SD (x13mm hex); 1/2" SD (x19mm hex).

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DAM668 Digital Multimeter

DAM668 Digital Multimeter Features include:
Continuity, diode, transistor hFE, auto ranging, reading/peak hold, bar graph, fused current range, overload indication: low battery indicator, tilt stand/hanger.

Voltage max: 700V AC 1000V DC.
Current max: 10A AC/DC.
Resistance max: 32.6MW.
Capacitance max: 32.6mF.
Frequency max: 150kHz.
Safety Rating; Cat III 600V, Cat II 1000V.
Warranty: 1 year.

Supplied with removable rubber holster with integral lead holders.

Granton Knives

All Granton knives are available with a choice of red, blue, yellow, green, brown, white or black handles. This system helps prevent cross contamination by assigning coloured handles to particular work areas.

2 1/2" Curved Peeler

This knife is used to peel or make fruits and vegetables decorative.

Diesel/Fuel Electrical Pump

The pump is designed exclusively for pumping diesel and fuel oil of the Hazard Class A III in areas that do not carry a risk of explosion. The temperature of the delivered fuel must be between -10°C and 35°C. Flow rate: 52ltr/min. 230V. Length of suction hose 1.6m, delivery hose 4m.