Single Hexagon Sockets

Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. Manufactured from chrome vanadium, fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location. 6 point - offer a more positive location, particularly on worn or rounded nuts, but require a one-sixth turn to engage the next point of the socket.

Bi-hexagon

AF (Deep)

Granton Knives

All Granton knives are available with a choice of red, blue, yellow, green, brown, white or black handles. This system helps prevent cross contamination by assigning coloured handles to particular work areas.

2 Knife Scabbard

For safe belt storage of up to 2 knives.

3/8" Square Drive Spark Plug Sockets

Designed for insertion/removal of spark plugs. The Neoprene insert helps retain the spark plug and protect the insulation material from accidental damage.

Cross Pein Hammers

Traditionally used by joiners and fitters. Cross pein can be used for setting pins and nails prior to "driving home" with the flat faced pein.

Warrington Hardwood Shaft

Close grained hardwood shaft shaped to comfortably fit in the hand. Forged steel head with ground and polished striking face.

Kennedy® Parallel Pin Punch Sets

Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066.

150mm (6") Overall Length

Supplied in plastic wallet.

Kennedy Clamps

The Kennedy Quality Industrial Tooling G-clamps have drop forged steel bodies with anti-twist ribbed reinforcement and a precision machined drive screw with swivel shoe for positive location on the material being clamped.

Medium Duty G-Clamp

Engineers' clamps with cast anti-twist ribbed frame. For the tradesman, light engineering work, woodworkers etc.

For all dimensional specifications please refer to our catalogue.

Flexi Ring End Sockets

Made from Polished Chrome vanadium.
These tough Flexi Ring End Sockets are made for access to
that awkwardly positioned nut or bolt

Slide Hammer Assembly

For use with Sykes-Pickavant split coller type internal extractors. Hammer displacement 220mm.

1/2 & 3/8'' Square Drive Professional Torque Wrench - Industrial Ratchet Models

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS).



The professional torque wrench offers an ideal combination of accuracy, robust construction, comfort and ease of use. The push-through ratchets on these models are robustly engineered for strength and durability. The strength and high wear resistance comes from the design of the tooth pattern while the principle of offset ratchet pawls gives a narrow engagement angle. Accuracy of +/-3% of reading exceeds all international standards for torque wrenches. Every wrench is supplied with a calibration certificate to satisfy the requirements of ISO 9000-2000. Soft feel handle provides excellent grip even in oily conditions. Handle material and lens resist all chemicals in common automotive, industrial and aviation uses. Locking mechanism prevents accidental adjustment of the wrench during operation. Long scale graduated in Nm and lb/ft allows for foolproof and accurate setting, kgf/m and lbf/in scales are also available. Supplied in moulded box for storage and protection.

Torque Range: 20-100Nm 15-80ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

Cylinder Hone Set

4 different honing tools in one set covering a wide range of cylinder bore diameter 18mm-89mm (11/16" - 31/2"). Honing diameter and pressure is adjusted via a simple, spring and cone mechanism. Flexible drive shaft for easy alignment. Suitable for honing/deglazing car brake and clutch cylinders, motorcycle, lawnmower, outboard motor engine cylinders, small bore car engine cylinders. Fits into all 3 jaw chucks. Can be used with any variable speed drill.
Set Contents: Main honing body, 2 leg set - 60mm, 3 leg set - 60mm, 3 leg set - 50mm. 3 sets of honing stones - fine, medium and coarse.

Twin leg 18-64mm (1.1/16" - 2.1/2"): For small brake cylinders, Use medium collar twin leg set, 2 x 29mm stones (NB Ready assembled in kit)
Triple leg 19-68mm (3/4 - 2.3/4"): For large brake/clutch cylinders, Use medium collar Small triple leg set 3 x 29mm stones.
Triple leg 32-89mm (1.1/4" - 3.1/2"): For disc brake cylinders, Use large spring, Large triple leg set, 3 x 19mm stones
Triple leg 32-89mm (1.1/4" - 3.1/2"): For small engine cylinders, Use large spring, Large triple set, 3 x 51mm stones

Packaging dimensions (W x H x D): 215 x 91 x 15mm.
Gross weight: 248g.