Mechanics Screwdrivers

Featuring a classic slimline design favoured by the automotive industry. Black high impact plastic handles. Chrome finish alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life. Flat blades have hexagon bolster to allow extra torque to be applied using a spanner.

Flared

Neo-Hold Gripping Magnet

A high power gripping magnet achieved by two poles close together on one face. Thus a greater holding power is created, more than a pot or button magnets of a similar size. Ideal for confined work areas where more holding power is required. Can be used in temperatures up to 100°C.

Tri-Torq Torque Wrenches

Tri-Torq wrenches are a unique triangular handle design linear torque wrench, once the preset torque has been reached an audible "CLICK" is emitted. Manufactured from high quality satin finish steel with a polished steel head.

Conforms to BS EN 26789 : 1994 and Federal GGG-W-686 standards.

FXL200 1/2'' Drive 40-200Nm Torque Wrench

Torque Range:
40-100Nm/30-150lbf.ft

1/4" Square Drive Bi-Hexagon Sockets

Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All Bi-hexagon unless stated.

Metric

Chrome Molybdenum Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

BSW Deep

1/2? Drive BSW Size, Deep Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

Thor Soft Faced Hammers

A safer alternative for striking machined surfaces than conventional steel hammers. The impact resistant striking faces shape themselves to the component being struck, minimising rebound damage to the component and reducing noise pollution in the work place. The striking faces can be easily replaced once they have become worn. Available as standard, with a choice of 5 interchangeable face types:

Rawhide Face

Head manufactured from malleable iron fitted with two rawhide striking faces and solid wooden handle. Rawhide manufactured from genuine water buffalo hide, tightly coiled and pressed three times under powerful hydraulic presses to ensure uniform quality and maximum durability.

Holdall with Shoulder Strap

Manufactured from Butt split leather with wrap around leather handles. 3 leather fastening straps with metal buckles and an adjustable shoulder strap. Fully riveted construction. Black finish.

Kennedy® Replacement Jaws

Replacement jaws for KEN 515-5340K crimping tool.

Metric

High mechanical performance combined with compact design complying with aeronautical standards:
Ring heads:
Ring clearance designed for better access to recessed or closely spaced screws. 12-point OGV profile for a high torque without damaging the nut. Angled at 15°.
Open-ends:
Optimised open end / handle geometry for increased accessibility. Ground contact faces. Satin chrome finish.
Industrial and automotive : ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1, NF E74-306. W Aerospace: SAE AS 954E.



Open end profile is designed to allow greater accessibility & turning arc versus standard pattern combination wrenches. Ring end is thin walled with a high relief zone for greater access to recessed and hard to access bolts. Open ends have mechanical characteristics above and beyond NF ISO 1711 - 1. Ring ends are designed to outperform Aerospace SAE AS 954E Standards.

Kennedy® Standard Industrial Terminals - Blue Ring

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.