Phosphate Finish Adjustable Wrench

Kennedy adjustable spanners are manufactured from high strength I beam section chrome vanadium steel for improved strength and rigidity, the jaws are heat treated for extended tool life. 15 offset head angle for positive torque control.

Slimline tapered jaws for improved access into confined spaces.

Parallel jaws with smooth jaw adjustment and self-locking design prevents the jaws opening unintentionally even when under full load.

Suitable for industrial engineering, automotive, agricultural, maintenance and assembly applications.



Phosphate finish: black chemical finish for industrial engineering and automotive use.

Nylon Coated, Double-Sided Auto Locking Tape Measures

These tapes have a nylon coating for extra life. The double sided marking makes all the difference when measuring ceilings and window reveal etc. All come with an automatic brake which locks the blade in position during use until you press the release control button. They also benefit from a sliding magnetic hook and belt clip.

5m Auto Locking Tape Measure

This tape measure has metric graduations on both sides with easy to read markings.
Blade width: 25mm.

Wobble Extensions

Manufactured from high quality chrome vanadium with a fully polished finish. All with knurled finger grip.



In areas where clearance may be a problem the wobble square drive can be used at an angle of up to 15.

Standard Sockets

Chrome vanadium. Bi-hexagon. (12 point). This range of 1" (25mm) series sockets is the ultimate for high torque hand applications. The single hexagon design gives strength and reliability under heavy loads. Used extensively in heavy plant, rail, shipyard and oil rig industries. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets. Manufactured from chrome vanadium and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. Chamfered leading edge ensures easy fastener location. Used for tightening and untightening nuts where the threaded stem of the mating fastener prevents access with standard length sockets.

A/F

1" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

A/F

1? Drive Inch Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

3/8" Square Drive Bi-Hexagon Sockets

Chrome vanadium. Bi-hexagon. (12 point). All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all 3/8" drive accessories.

Metric Deep

Spares for Kennedy Combination Squares and Rules

Locking Nut & Mandrel:
For 6" Combination Square (KEN-597-7060K)
For 12" Combination Square (KEN-597-7120K)

Glass Pliers

Designed for holding and shaping glass. Handles are painted instead of dipped to prevent the embedding of glass splinters.

PA1014/8"

6 Way Hydraulic Puller Set

10 ton capacity hydraulic ram with tommy bar. Supplied with 3 position puller legs covering a spread of 50 - 250mm and reach of 0 - 250mm. Can be used as a 2 or 3 legged puller with the same head.



Contents: 1 x combination head. 1 x hydraulic ram. 3 x 3 position puller legs. 6 x leg connectors. 6 x screw nuts, bolts & washers. 1 x 32mm ext. rod. 1 x ram nut. 1 x blow moulded storage case.

Wiha ClicFix Telescopic Screwdriver Set

36933
Built-in magazine with 6mm hex mount. Blade length adjustment (50 - 85mm). Quick-change magnetic holder for true one-handed
operation. High quality steel blade, hardened and chrome plated. DIN 3126.

Includes: screwdriver bits:
PH 1, 2 and 3.
PZ 1, 2 and 3.
Slotted 6.5mm