Gas Test Gauge Manometer

Made from tough plastic, used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances. Marked in millibars the scale adjusts to zero the water level. Extruded cover slides off and may be clipped over the base for standing the tool vertically during use. Hanging tab permits vertical hanging from suitable protrusion.

257C

300mm long, 30 millibar capacity.

Kennedy Professional Ai-Bronze Spark Resistant Safety Tools

Spark resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapors or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.

Non-Sparking Flat Cold Chisel

General Purpose Tinsnips

A comprehensive range for varied cutting tasks.

G245 - Straight Blade

Drawers/Dividers for Kennedy Small Parts Storage Cabinet Range

Drawers:
Small: (H)36.5 x (W)54 x (L)140mm
Medium: (H)59 x (W)140 x (L)140mm
Large: (H)59 x (W)280 x (L)140mm

Dividers:
Small: 50 x 29mm (Pk 10)
Medium/Large: 133 x 50mm (Pk 5)

Small Parts Storage Cabinet shown for illustration purposes (not included)

16mm Spigot End Fittings

Inch

Open End

Drawer Labels

To suit the 1200 Series Drawers.

Pin Punches

Manufactured from hardened and tempered steel with a knurled grip. Suitable for use in the machine shop or the automotive industry to drive tight fitting pins out of mechanical assemblies or to realign holes to fit dowel pins.

100mm (4") - Overall Length

CV Hex Keys

Manufactured from chrome vanadium steel with a nickel plating. Manufactured to ISO2936 (formerly DIN 911L). Set supplied in an indexed plastic holder. Individual hexagon key slots help to instantly identify missing keys.

Raaco Carry-Lite Service Case

Made from polypropylene and polycarbonate. Can be sub-divided using dividers. Fitted with sliding locks and a handle.

Tri & Mitre Square

Bevelled squares are used for marking out lines, testing squares and angle lengths. Sliding bevels are used for marking angle lengths. All measuring tools are made from aluminium block and with a steel blade. The scales are etched on the surface which ensures long durability. Edge holder for accurate positioning.