Inspection Mirrors

Spare Bulb

Barrel Adaptors

Converts from DIN61 female to 2" BSP female.

Yellow - ADDIN61

Kennedy® Heavy Duty Wire Stripper

MK02
For stripping of outer insulation from cables. Spring loaded gripping arm, blade has adjustable cutting depth of up to 3mm. Blade can be turned through 90° by pushing the side button, to cut along the length of cable. Also features a spring loaded ripping blade for insulation removal.
Overall length: 138mm.
Capacity: 4.5 - 28mm2.

Direct Drive Bits for Power Tools

1/4" Hex with ball recess.

Flat

Kennedy® Magnetic Holder

Incorporates vee and plain faces. Enables accurate positioning of workpieces relative to each other, also secures sheets, bars and tubes.
Dimensions (W x L x H): 108 x 108 x 104mm.

WHS Pointing Trowels

For pointing walls and use in confined areas. Roll forged, hardened and tempered high carbon steel blades with lacquered coating to inhibit rust. London pattern smooth rounded wooden handle with internal tang.

Kennedy Professional Ai-Bronze Spark Resistant Safety Tools

Spark resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapors or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.

Ring End Slogging Wrench

With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Kennedy Hexagon Key L-Wrenches

Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish.

Rutland™ 1/4" Mesh Riddle

For bringing soil to a suitable condition, removing large lumps to provide the perfect potting soil, according to size. Made of steel mesh. Diameter: 360mm. Depth: 70mm.

Cross Pein Hammers

Traditionally used by joiners and fitters. Cross pein can be used for setting pins and nails prior to "driving home" with the flat faced pein.

"Pin" Hardwood Shaft

Hardened and ground forged steel head with polished striking face securely fixed to a close grain hardwood shaft. Shaped to fit comfortably in the hand. Tapered head, suitable for use with small pins helps reduce over-strike.