Open Jaw Slogging Wrenches

Manufactured to DIN 133.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Kennedy Hydraulic Bottle and Trolley Jacks

Kennedy Hydraulic bottle jacks have large cast iron bases with a steel housing and lift cylinder, that has an adjustable notched load saddle. Each jack is fitted with an overload protection valve. Two piece pumping handle also operates hydraulic release.

For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

GS and TUV approved.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Hydraulic Bottle Jacks

Model number: B2045
Maximum load: 20 Metric Tonnes.
Height range: 242 to 452mm Min/Max.
Max saddle adjustment: 60mm.
Weight: 11.20kg.

(Load ratings are Metric Tonnes i.e. 1 tonne = 1,000kg).
Supplied with spare seals.

L-Wrench TX Keys

Manufactured from chrome molybdenum steel. Torx is a registered trademark of Camcar/Textron.

Industrial Combination Spanners

Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm - 25mm, 1/4" - 1" AF - DIN 3113.
26mm - 95mm, 11/16" - 2" AF - ASME B107.6.
1/8" - 1/2" Whitworth - DIN 3113 & BS192:1982.
9/16" - 7/8" Whitworth - ASME B107.6 & BS192:1982.

A/F

Hydraulic Connectors

Slide On Type With Knuckle Joint



Securely grip the grease nipple while in use. Hardened steel jaws and precision machined bodies.

1/2" Square Drive Torx Sockets

Chrome vanadium. For use with male headed TX fasteners commonly found in the automotive industry. Overall length: 37mm.

Screwdriver Sockets

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. For insertion and removal of fasteners and fixings using 3/8"square drive tooling. Unique knurled body gives extra grip which is essential for a quick tool change when your hands are greasy/oily. Manufactured from chrome vanadium steel and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. All have ball retaining groove on each face of the square drive. Overall length: 50mm. Bit length: 20mm. Conforms to DIN standards.

Torx

Irwin® Vise-Grip Curved Jaw Locking Pliers 3 Piece Set

10508020
Self-energising lower jaw provides three times more gripping power, with no slipping or stripping on any style nut or bolt head. Unique curved jaw CR. Hex key adjusting screw. Guarded release.

Set contains:
10508017: 10CR Length 250mm, 48mm Cap.
10508018: 7CR Length 175mm, 38mm Cap.
10508019: 5CR Length 125mm, 29mm Cap.

Granton Knives

All Granton knives are available with a choice of red, blue, yellow, green, brown, white or black handles. This system helps prevent cross contamination by assigning coloured handles to particular work areas.

10" Counter Knives

Overall length: 15 1/2'' knife. 24mm deep (top to bottom) blade for flexibility when thin slicing is required. Pointed tip for piercing and accurate cuts. Granton edge for easy cutting. Stainless steel blade. Dishwasher safe.

Kennedy Stillson Pipe Wrenches

Jaws are serrated in the opposite direction to ensure a secure grip. Used mainly in the plumbing industry for gripping pipes & nuts. Cast iron frame, drop forged handles and jaws. All moving parts are heat treated. Used mainly in the plumbing industry for gripping pipes and nuts. Conform with BS 3594 : Part 2. Available in 7 sizes ranging from 8" - 36".

Standard Duty